ICP DAS USA MSM-508FCS, MSM-508FT user manual Web Connection, Step

Page 5

Industrial Ethernet Layer 2 Managed Switch – Web Management Manual

1.Web Connection

The default network setting (factory default setting) of Managed Switch is :

IP : 192.168.255.1

Mask : 255.255.0.0

Gateway : 192.168.0.1

Before accessing Managed Switch through web browser, please modify above setting to fit your network environment, you can referRS-232 Console Operationmanual for more detail.

Following, we will show you how to connect to the Web Management step by step.

STEP 1 :

Execute web browser application, ex: Mozilla, Netscape, Internet Explorer …etc, input the Switch’s IP address in the Address field of web browser, and press ENTRY to start web connection.

STEP 2:

If connection succeeds, a login box will popup as following:

The default account and password of Web Management are Admin and Admin.

When authentication succeeds, you can see the welcome information display.

April 29, 2008

2

Image 5
Contents Industrial Managed Ethernet Switch Contents Authentication Managed Switch Web Management Operation Step Web ConnectionApril 29 Information Basic SettingGateway: NetworkIP Address: Mask: Serial PortMAC Address: Modbus Net IDDigital Input / Output Redundant Setting Redundant SettingHello Time STP Protocol: Recovery Time SettingRecovery Time Cyber-Ring Protocol: Maxage Time STP Protocol: Forward Time STP Protocol:Mirror Port configurationEgress Egress & IngressPort Status TrunkingPort Cable CheckingSpeed DuplexRelay Output Relay AlarmAlarm Event setting Email AlarmReceiver Email SettingEmail Record 802.1Q Check Mode Vlan Mode802.1Q Secure Mode Port Based VlanEgress Policy Port based VLANs802.1Q VLANs 2,1 Weight Fair queuing scheme QoS ModeQoS Strict priority schemeTag Priority Default PriorityIP ToS/DiffServ 802.1p Tag over Tos/DiffServDiagnosis AuthenticationPing AccountAccessible IP Reboot Setting Default SettingNetwork Setting Serial Port Setting