Industrial Ethernet Layer 2 Managed Switch – Web Management Manual
Port | Port Number |
Speed | Port transmission speed.（10 Mbps／100 Mbps） |
Duplex | Flow Control Mode. Both |
Link | Port Link status. ON : Link is up ; OFF : Link is down. |
Cable Checking
This function provides a useful tool to detect the quality of cables.
Tick the checkbox of Ports and click “Start Check” button, after a moment waiting, system will report the RX and TX status.
There are 4 types of status message can be displayed.
Good | Normal cable |
Test Fail | Cable checking fail. |
Open | Open in cable. |
Short | short in cable |
Switch Management also can detect the problem approximate location and shows up in the Length field.
April 29, 2008 | 13 |