Foundry NetIron M2404C/M2404F Metro Access Switches
1.Copy the device software image file to the appropriate TFTP directory on the workstation.
2.Log into the switch through the console port or through a Telnet session. If you log in using Telnet, your Telnet session will disconnect when you reset the switch to run the new software.
3.Make sure there is enough free space on the device file system. Use “dir” command for this. Free disk space should be at least 0.5MB larger then the downloaded application size.
Example:
|
|
| |||
Listing Directory flash:/: | 17:56 Boot/ | ||||
d | S | 2048 | Jun 30 2005 | ||
d | S | 2048 | Jan | 1 1993 | 00:04 Etc/ |
d | S | 2048 | Jun 14 2005 | 12:01 Java/ | |
d | S | 2048 | Jan | 1 1980 | 00:00 Log/ |
d | S | 2048 | Jul | 5 2005 | 21:36 Usr/ |
d | SH | 2048 | Jan | 1 1980 | 00:00 Hidden/ |
-260 Jan 1 1993 00:00 profile.cfg
-43796 Jul 5 2005 21:26 dflt_startup_bin.cfg
-5382 Jul 5 2005 21:26 dflt_startup.cfg
Free disk space 5655104
4.If there is not enough free space, delete unnecessary files. This is done by using “del” command.
Example:
5.Download the device software image from the TFTP server using the copy application command in Privileged (Enable) mode:
Example:
NOTE The switch remains operational while the image is downloaded.
The application is downloaded into /Boot directory.
January 2007 | © 2007 Foundry Networks, Inc. | 27 |