Foundry NetIron M2404C/M2404F Metro Access Switches
WARNING GROUNDING
Before connecting the product to the power line, make sure that the protective ground terminal of the device is connected to the safety ground conductor of the mains power cord.
The main power supply plug should only be inserted in a socket outlet provided with a connected safety ground. The protective action must not be negated by use of an extension cord (power cable) without a protective conductor (grounding). Any interruption of the protective (grounding) conductor or disconnection of the protective ground terminal can make the device unsafe to use. Intentional interruption is prohibited.
This equipment has a connection between the earthed conductor of the DC supply circuit and the grounding conductor.
WARNING WIRING FOR NATIONAL POWER PLUG
A mains power cable according to National Electrical Code (NEC) with molded IEC socket is supplied with each unit. The specific national mains power plug should be wired as follows:
• | Brown lead | Live (phase) |
• | Blue lead | Neutral |
• | Green/Yellow lead | Safety ground. |
|
|
|
WARNING LINE VOLTAGE
Before connecting the product to the power line, make sure the voltage of the power source matches the requirements of the product, as marked on the label located near the power connectors.
WARNING DC POWER SOURCE
The DC power source should be protected with a branch circuit over- current protection rated at 10Amp, located in the building installation
January 2007 | © 2007 Foundry Networks, Inc. | iii |