Fortinet 60c manual Turning the FortiGate unit power on and off, Power requirements

Getting started Turning the FortiGate unit power on and off

Power requirements

•DC input voltage: 12 V

•DC input current: 3 A

Environmental specifications

•Operating temperature: 32 to 104°F (0 to 40°C)

•Storage temperature: -13 to 158°F (-25 to 70°C)

•Humidity: 5 to 95% non-condensing

Turning the FortiGate unit power on and off

To power on the FortiGate unit

1Connect the AC adapter to the power connection at the back of the FortiGate-60 unit.

2Connect the AC adapter to the power cable.

3Connect the power cable to a power outlet.

The FortiGate-60 unit starts. The Power and Status LEDs are on.

Table 1: FortiGate-60M LED indicators

LED	State	Description
Power	Green	The FortiGate unit is powered on.
	Off	The FortiGate unit is powered off.
Status	Green	The FortiGate unit is starting up.
	Off	The FortiGate unit is running normally.
Link	Green	The correct cable is in use and the connected
(Internal		equipment has power.
DMZ
	Flashing Green	Network activity at this interface.
WAN1
	Off	No link established.
WAN2)
100	Green	The interface is connected at 100 Mbps.
(Internal
DMZ
WAN1
WAN2)

To power off the FortiGate unit

Always shut down the FortiGate operating system properly before turning off the power switch.

1From the web-based manager, go to System > Maintenance > ShutDown, select Shut Down and select Apply, or from the CLI, enter:

execute shutdown

2Disconnect the power supply.

FortiGate-60 Installation Guide 01-28008-0018-20050128 15