Eizo FlexScan L675 manual Required system environment, Connecting to the USB HUB

Page 33

5.MAKING USE OF USB (Universal Serial Bus)

This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.

Required system environment

PC equipped with USB ports or another USB hub connected to the USB compliant PC

Windows 98/Me/2000 // Mac OS 8.5.1 or later

USB cable / MD-C93 (Optional)

The USB hub function may not work properly depending on the PC, OS or peripherals. Please consult the manufacturer of each device about the USB support.

When the monitor is not on, the peripherals connected to the downstream ports will not operate.

Even if the monitor is in a power saving mode, the devices connected to the monitor’s USB ports (both the upstream and the downstream) will function.

Connecting to the USB HUB

Do not connect the downstream port of the monitor to any peripherals until finishing the USB function.

The followings are procedures for the Windows 98/Me/2000 and Mac OS.

1.Connect the monitor to the PC with the signal cable (See page 15) first, then turn on the PC.

2.Connect the upstream port of the monitor to the downstream port of the USB compliant PC or another hub by using the USB cable .

ENGLISH

Upstream

Ports

Upstream port: Connect the USB compliant PC or another hub using the USB cable.

To Downstream Ports of the PC or Another Hub

After connecting the USB cable, the USB function can be set up automatically.

5. MAKING USE OF USB (Universal Serial Bus) 33

Image 33
Contents English Safety Symbols Table of Contents Precautions ´ Refer all servicing to qualified service personnel´ Do not dismantle the cabinet or modify the unit Keep small objects or liquids away from the unit ´ Place the unit on a strong, stable surface´ Set the unit in an appropriate location ´ Handle the power cord with care ´ The equipment must be connected to a grounded main outlet´ Use the correct voltage ´ Handle with care when carrying the unit ´ Do not touch a damaged LCD panel directly with bare hands´ Do not block the ventilation slots on the cabinet ´ Periodically clean the area around the plug ´ Use an easily accessible power outlet´ Unplug the unit before cleaning it ´ Do not touch the plug with wet handsSuggestions for Maximizing Comfort Introduction FeaturesPackage Contents Front Controls & ConnectorsRear Cable Connection Before connectingAnalog Input Digital InputConnecting the signal cable Analog InputDigital Input 16 2. Connecting UP Plug the other end of the power cord into a power outlet Making Adjustments and Settings How to use the ScreenManagerEntering the ScreenManager Exiting the ScreenManagerMain menu Sub menu Reference ScreenManager Adjustments and SettingsAdjustment Lock Useful FunctionsEizo Logo Disappearing function Off Timer ProcedureOff timer system Screen Adjustment AdjustmentAdjustment Procedure for Analog Input Push the Auto adjustment button on the front panelHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Set the Contrast of the screen Use the Contrast adjustmentScreen position is incorrect Use the Resolution adjustmentSet the Contrast of the screen Set the Brightness of the screenDisplaying a low resolutions 28 4. Adjustment Before the Color adjustment Color AdjustmentTo change the flesh color, etc Use the Hue adjustment To change the saturation Use the Saturation adjustmentTo use the PC’s power saving system Vesa Dpms Power-save SetupTo set the power save with ScreenSaver software Eizo Mpms Power saving system32 4. Adjustment Required system environment Connecting to the USB HUBUSB Example of connectionMonitor Connecting Examples Analog x DigitalAnalog x Analog Digital x digitalSelecting the active input Priority input signalAttaching AN ARM Stand Setup Procedure38 7. Attaching AN ARN Stand Problems Points to check with possible solutions TroubleshootingNo picture Following messagesAfterimages appear Too darkScreen has defective Auto adjustment Button does not operatePixels e.g. slightly light Or darkSetup Change after installingFrequency does not PC is hung up. /Cleaning CabinetLCD Panel Vesa DDC 2B SpecificationsBeeper settings Default settingGlossary Color Temperature TemperatureAfterimage ClockPhase Gain AdjustmentRange Adjustment ResolutionAttaching AN ARM Stand IndexUSB 10,31,33,44 Vesa Dpms 19,31,47 Memo Appendix Appendix / Anhang / AnnexeIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Pin Assignment Pin-Belegung Affectation des Broches Dimensions AbmessungenWhy do we have environmentally labelled computers? CongratulationsWhat does labelling involve? Cadmium Environmental requirements Flame retardantsMercury CFCs freonsWe, the Responsible Party Warland Drive, Cypress, CAPhone 562 431