Eizo FlexScan L675 manual Selecting the active input, Priority input signal

Selecting the active input

The Input signal selection button on the front panel can be used to select either Signal 1 or Signal 2 as the active input at any time. Every time the button is pressed, the input changes. When the switching the signal, the displaying signal kind (signal 1 or 2/Analog or digital) is displayed for a few seconds.

S IG N AL	A U TO	E N TE R
1-2

Input Signal Selection Button

The priority input signal

This function is used to select which PC will have priority to control the monitor when utilizing two PCs. The monitor constantly checks the input signals and switches automatically in accordance with the “Input Priority” setting (see table below).

Once a priority is set, whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal.

In the case of only one signal being present at either input, the monitor automatically detects and displays that signal.

Priority setting	Performance
Signal 1	If signals from both inputs are present, the monitor gives preference
	to Signal 1 in the following cases.
	• When the power of the monitor is turned ON
	• When the signal input to Signal 1 is changed even if active input
	was Signal 2.
Signal 2	If signals from both inputs are present, the monitor gives preference
	to Signal 2 in the following cases.
	• When the power of the monitor is turned ON
	• When the signal input to Signal 2 is changed even if active input
	was Signal 1.
Manual	The monitor will not detect signals automatically in this mode.
	Select the active input by pressing the input signal selection button
	on the monitor’s front panel.

•Regarding the power saving mode

When the Signal 1 or Signal 2 is selected, the power saving mode of the monitor activates only if both PCs are in power saving mode.

36 6. CONNECTING TWO PCs TO THE MONITOR