Eizo FlexScan L675 manual ´ The equipment must be connected to a grounded main outlet

Page 6

WARNING

´ To disconnect the power cord, grasp the plug firmly and pull.

OK

Never tug on the cord, doing so may cause damage and could result in fire or electric shock.

´ The equipment must be connected to a grounded main outlet.

Failure to do this may reslut in an electric shock.

´Use the correct voltage.

*The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or other damage.

*Do not overload your power circuit, as this may result in fire or electric shock.

*For proper connections of the power cord, be certain to plug the power cord to the provided unit connector and directly to a wall outlet. Not doing so may result in fire or electric shock.

´Handle the power cord with care.

*Do not place the cord underneath the unit or other heavy objects.

* Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock.

´Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock.

´When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws.

Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely.

6 PRECAUTIONS

Image 6

Contents English Safety Symbols Table of Contents Precautions ´ Refer all servicing to qualified service personnel´ Do not dismantle the cabinet or modify the unit Keep small objects or liquids away from the unit ´ Place the unit on a strong, stable surface´ Set the unit in an appropriate location ´ Handle the power cord with care ´ The equipment must be connected to a grounded main outlet´ Use the correct voltage ´ Handle with care when carrying the unit ´ Do not touch a damaged LCD panel directly with bare hands´ Do not block the ventilation slots on the cabinet ´ Unplug the unit before cleaning it ´ Use an easily accessible power outlet´ Periodically clean the area around the plug ´ Do not touch the plug with wet handsSuggestions for Maximizing Comfort Features IntroductionPackage Contents Controls & Connectors FrontRear Analog Input Before connectingCable Connection Digital InputConnecting the signal cable Analog InputDigital Input 16 2. Connecting UP Plug the other end of the power cord into a power outlet Entering the ScreenManager How to use the ScreenManagerMaking Adjustments and Settings Exiting the ScreenManagerScreenManager Adjustments and Settings Main menu Sub menu ReferenceAdjustment Lock Useful FunctionsEizo Logo Disappearing function Off Timer ProcedureOff timer system Adjustment Procedure for Analog Input AdjustmentScreen Adjustment Push the Auto adjustment button on the front panelHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Set the Contrast of the screen Use the Contrast adjustment AutoSet the Contrast of the screen Use the Resolution adjustmentScreen position is incorrect Set the Brightness of the screenDisplaying a low resolutions 28 4. Adjustment Color Adjustment Before the Color adjustmentTo change the saturation Use the Saturation adjustment To change the flesh color, etc Use the Hue adjustmentTo set the power save with ScreenSaver software Eizo Mpms Power-save SetupTo use the PC’s power saving system Vesa Dpms Power saving system32 4. Adjustment Connecting to the USB HUB Required system environmentExample of connection USBAnalog x Analog Connecting Examples Analog x DigitalMonitor Digital x digitalPriority input signal Selecting the active inputSetup Procedure Attaching AN ARM Stand38 7. Attaching AN ARN Stand No picture TroubleshootingProblems Points to check with possible solutions Following messagesToo dark Afterimages appearPixels e.g. slightly light Auto adjustment Button does not operateScreen has defective Or darkFrequency does not Change after installingSetup PC is hung up. /Cleaning CabinetLCD Panel Specifications Vesa DDC 2BDefault setting Beeper settingsAfterimage Color Temperature TemperatureGlossary ClockRange Adjustment Gain AdjustmentPhase ResolutionIndex Attaching AN ARM StandUSB 10,31,33,44 Vesa Dpms 19,31,47 Memo Appendix / Anhang / Annexe AppendixIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Dimensions Abmessungen Pin Assignment Pin-Belegung Affectation des BrochesWhy do we have environmentally labelled computers? CongratulationsWhat does labelling involve? Mercury Environmental requirements Flame retardantsCadmium CFCs freonsWe, the Responsible Party Warland Drive, Cypress, CAPhone 562 431