Eizo S1932 manual To use ScreenManager Pro for LCD, Connection

Page 11

●To use ScreenManager Pro for LCD

For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk.

To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable.

[Connection]

(1)Connect the USB port (downstream) of a USB compatible PC (or other USB hub) and the monitor’s USB port (upstream) with the supplied USB cable.

(2)The USB function is set up automatically upon connection of the USB cable.

Upstream

Chapter 2 Settings and Adjustments

Image 11

Contents Contents Eizo Nanao Corporation To use the monitor comfortably Contents Features Features and OverviewIndicator status Operation status Buttons and IndicatorsOr selecting to decrease it Example Operation method Icon Function Overview Adjustment menu icon listSelects a language for Utility Disk Disk contents and software overviewConnection To use ScreenManager Pro for LCDDigital Input Screen AdjustmentTo eliminate vertical bars Clock To remove flickering or blurring PhaseTo correct screen position Position Mode Purpose Color AdjustmentTo select the display mode FineContrast mode Icon Function FineContrast mode To perform advanced adjustmentsAdjustment items in each mode To adjust the brightness BrightnessTo adjust the gamma value Gamma To adjust the contrast ContrastTo adjust the color saturation Saturation To adjust the color temperature TemperatureTo adjust the gain value Gain To set Enable/Disable of the contrast enhancer Cont Enhancer To adjust the hue HueTurning off the monitor automatically Off Timer Adjusting Sharpness SharpnessEnabling/Disabling DDC/CI communication DDC/CI Locking Buttons Key Lock Menu LockDisplaying Monitor Infomation Info1 Info2 Displaying Eizo logo Setting Power Indicator ON/OFF Power LEDSetting Language Language To reset all adjustments to the factory default settings Resuming the Default Setting ResetTo reset color adjustment values Connection examples Connecting Two PCs to the MonitorTo switch the input signal Setting auto-selection of the input signal Input Signal Characters are blurred Problems Possible cause and remedy No pictureMessage below appears Screen is too bright or too darkNoise appears on the screen Adjustment menu does not appearScreen Outline of the letters are coloredAttach the monitor to the arm or stand Attaching an ArmCleaning Power Saving ModeSpecifications Main default settings factory settings Outside Dimensions Height adjustable stand Outside Dimensions Tilt standOutside Dimensions EZ-UP stand Outside Dimensions ArcSwing2 standOption List Connector Pin AssignmentPin No Signal Contact No Signal RemarksGlossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingVertical Hz Preset TimingFrequency Mode Dot clock PolarityFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 4th Edition-March