Eizo S1932 manual To use the monitor comfortably

Page 3

Notice for this monitor

This product is suited to general purposes like creating documents, viewing multimedia content.

This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.

This product may not be covered by warranty for uses other than those described in this manual.

The specifications noted in this manual are only applicable when the following are used:

•Power cords provided with the product

•Signal cables specified by us

Only use optional products manufactured or specified by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more after the monitor power has been turned on.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to “Cleaning” on page 27).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.

The backlight of the LCD panel has a fixed lifetime. When the screen becomes dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the monitor.

To use the monitor comfortably

An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the environmental conditions.

Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Contents Eizo Nanao Corporation To use the monitor comfortably Contents Features Features and OverviewIndicator status Operation status Buttons and IndicatorsOr selecting to decrease it Example Operation methodIcon Function Overview Adjustment menu icon listSelects a language for Utility Disk Disk contents and software overviewConnection To use ScreenManager Pro for LCDDigital Input Screen AdjustmentTo eliminate vertical bars Clock To remove flickering or blurring PhaseTo correct screen position Position Color Adjustment To select the display mode FineContrast modeMode Purpose Icon Function FineContrast mode To perform advanced adjustmentsAdjustment items in each mode To adjust the brightness BrightnessTo adjust the gamma value Gamma To adjust the contrast ContrastTo adjust the color temperature Temperature To adjust the gain value GainTo adjust the color saturation Saturation To set Enable/Disable of the contrast enhancer Cont Enhancer To adjust the hue HueTurning off the monitor automatically Off Timer Adjusting Sharpness SharpnessLocking Buttons Key Lock Menu Lock Displaying Monitor Infomation Info1 Info2Enabling/Disabling DDC/CI communication DDC/CI Setting Power Indicator ON/OFF Power LED Setting Language LanguageDisplaying Eizo logo Resuming the Default Setting Reset To reset color adjustment valuesTo reset all adjustments to the factory default settings Connecting Two PCs to the Monitor To switch the input signalConnection examples Setting auto-selection of the input signal Input Signal Characters are blurred Problems Possible cause and remedy No pictureMessage below appears Screen is too bright or too darkNoise appears on the screen Adjustment menu does not appearScreen Outline of the letters are coloredAttach the monitor to the arm or stand Attaching an ArmCleaning Power Saving ModeSpecifications Main default settings factory settings Outside Dimensions Height adjustable stand Outside Dimensions Tilt standOutside Dimensions EZ-UP stand Outside Dimensions ArcSwing2 standOption List Connector Pin AssignmentPin No Signal Contact No Signal RemarksGlossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingVertical Hz Preset TimingFrequency Mode Dot clock PolarityFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 4th Edition-March
Top Page Image Contents