Eizo S1932 manual Selects a language for

Page 9

Icon	Function	Overview

		Settings

		Selects a language for the
	Language	adjustment menu or displaying
	Language	message. The language setting is
		message. The language setting is
		toggled by selecting the icon.
		PowerSave

		The sensor on the front side of the
		monitor detects the environmental
		brightness to adjust the screen
	Bright Reg	brightness automatically and
	Bright Reg	comfortably by using the
		comfortably by using the
		BrightRegulator function. The
		Enable/Disable setting is toggled by
		selecting the icon.
		Sets the power indicator (blue) ON/
	Power LED	OFF in the monitor ON condition.
	Power LED	The On/Off setting is toggled by
		selecting the icon.
		Turns off the monitor automatically
		after a specified time has passed.
		This function serves to protect the
		monitor from after-images caused
	Off Timer	when the same image is left
		displayed for a long time. Use this
		function when an image is displayed
		throughout the day.
		Adjustable range: Off, 1 to 23h
		Screen

		Emphasizes the outline of the image
		by emphasizing the color difference
		between the pixels composing the
	Sharpness	image and to improve a sense of
	Sharpness	quality and materiality. Contrarily,
		this function allows you to show
		the image smoothly by blurring the
		outline of the image.

Chapter 1 Overview and Features

Image 9

Contents Contents Eizo Nanao Corporation To use the monitor comfortably Contents Features Features and OverviewIndicator status Operation status Buttons and IndicatorsOr selecting to decrease it Example Operation methodIcon Function Overview Adjustment menu icon listSelects a language for Utility Disk Disk contents and software overviewConnection To use ScreenManager Pro for LCDDigital Input Screen AdjustmentTo eliminate vertical bars Clock To remove flickering or blurring PhaseTo correct screen position Position Color Adjustment To select the display mode FineContrast modeMode Purpose Adjustment items in each mode To perform advanced adjustmentsTo adjust the brightness Brightness Icon Function FineContrast modeTo adjust the gamma value Gamma To adjust the contrast ContrastTo adjust the color temperature Temperature To adjust the gain value GainTo adjust the color saturation Saturation To set Enable/Disable of the contrast enhancer Cont Enhancer To adjust the hue HueTurning off the monitor automatically Off Timer Adjusting Sharpness SharpnessLocking Buttons Key Lock Menu Lock Displaying Monitor Infomation Info1 Info2Enabling/Disabling DDC/CI communication DDC/CI Setting Power Indicator ON/OFF Power LED Setting Language LanguageDisplaying Eizo logo Resuming the Default Setting Reset To reset color adjustment valuesTo reset all adjustments to the factory default settings Connecting Two PCs to the Monitor To switch the input signalConnection examples Setting auto-selection of the input signal Input Signal Message below appears Problems Possible cause and remedy No pictureScreen is too bright or too dark Characters are blurredScreen Adjustment menu does not appearOutline of the letters are colored Noise appears on the screenAttach the monitor to the arm or stand Attaching an ArmCleaning Power Saving ModeSpecifications Main default settings factory settings Outside Dimensions Height adjustable stand Outside Dimensions Tilt standOutside Dimensions EZ-UP stand Outside Dimensions ArcSwing2 standPin No Signal Connector Pin AssignmentContact No Signal Remarks Option ListGlossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGBFrequency Mode Dot clock Preset TimingPolarity Vertical HzFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 4th Edition-March