Eizo S1932 manual Example Operation method, Or selecting to decrease it

Page 7

1-3 Basic operation of Adjustment menu and the icon list Basic operation of Adjustment menu

Displaying the adjustment menu

Pressing the function button to change the setting or pressing allows you to display the adjustment menu.

When pressing the input signal selection, mode, brightness control, or volume control button

When pressing the menu button

Modifying the setting

The operation methods differ depending on the icons.

Example	Operation method
	As for the icons displayed with the +/- marks, selecting + allows you to increase the setting value
	or selecting - to decrease it.

Selecting the icon displayed with mark allows you to show the next menu.

/The Enable/Disable setting is toggled by selecting the icon. × is displayed when the function is invalid.

Displaying the function name

(1)Press while the adjustment menu appears.

(2)The function name appears.

Storing the setting/Exiting the adjustment menu

After completing the setting, selecting allows you to store the setting. Selecting repeatedly allows you to close the adjustment menu.

Note

• The adjustment menu automatically finishes when no input operation occurs in 45 seconds.

Chapter 1 Overview and Features

Image 7

Contents Contents Eizo Nanao Corporation To use the monitor comfortably Contents Features Features and OverviewIndicator status Operation status Buttons and IndicatorsOr selecting to decrease it Example Operation methodIcon Function Overview Adjustment menu icon listSelects a language for Utility Disk Disk contents and software overviewConnection To use ScreenManager Pro for LCDDigital Input Screen AdjustmentTo eliminate vertical bars Clock To remove flickering or blurring PhaseTo correct screen position Position To select the display mode FineContrast mode Color AdjustmentMode Purpose Icon Function FineContrast mode To perform advanced adjustmentsAdjustment items in each mode To adjust the brightness BrightnessTo adjust the gamma value Gamma To adjust the contrast ContrastTo adjust the gain value Gain To adjust the color temperature TemperatureTo adjust the color saturation Saturation To set Enable/Disable of the contrast enhancer Cont Enhancer To adjust the hue HueTurning off the monitor automatically Off Timer Adjusting Sharpness SharpnessDisplaying Monitor Infomation Info1 Info2 Locking Buttons Key Lock Menu LockEnabling/Disabling DDC/CI communication DDC/CI Setting Language Language Setting Power Indicator ON/OFF Power LEDDisplaying Eizo logo To reset color adjustment values Resuming the Default Setting ResetTo reset all adjustments to the factory default settings To switch the input signal Connecting Two PCs to the MonitorConnection examples Setting auto-selection of the input signal Input Signal Characters are blurred Problems Possible cause and remedy No pictureMessage below appears Screen is too bright or too darkNoise appears on the screen Adjustment menu does not appearScreen Outline of the letters are coloredAttach the monitor to the arm or stand Attaching an ArmCleaning Power Saving ModeSpecifications Main default settings factory settings Outside Dimensions Height adjustable stand Outside Dimensions Tilt standOutside Dimensions EZ-UP stand Outside Dimensions ArcSwing2 standOption List Connector Pin AssignmentPin No Signal Contact No Signal RemarksGlossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingVertical Hz Preset TimingFrequency Mode Dot clock PolarityFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 4th Edition-March