Eizo S1932 manual Main default settings factory settings

Page 31

Mass	Main unit (including	6.0 kg (13.2 Ibs.)
	Tilt stand)

	Main unit (including	7.2 kg (15.9 lbs.)
	Height adjustable
	stand)

	Main unit (including	7.0 kg (15.4 Ibs.)
	ArcSwing2 stand)
	Main unit (including	8.8 kg (19.4 lbs.)
	EZ-UP stand)

	Main unit (without	5.2 kg (11.5 lbs.)
	stand)

Movable range	Tilt stand	Tilt: 30° Up, 5° Down

	Height adjustable	Tilt: 30° Up, 0° Down
	stand	Swivel: 35° Right, 35° Left
		Adjustable height: 100 mm (3.9 inch)
		Rotation: 90° (clockwise)
	ArcSwing2 stand	Tilt: 60° Up, 5° Down
		Swivel: 172° Right, 172° Left
		Adjustable height: 134.5 mm (5.3 inch)
	EZ-UP stand	Tilt: 25° Up, 0° Down
		Swivel: 172° Right, 172° Left
		Adjustable height: 159.3 mm (6.3 inch)
		Rotation: -10° to 92° (clockwise)

Environmental	Temperature	Operating temperature: 0 °C - 35 °C (32 °F - 95 °F)
Conditions		Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
	Humidity	Relative humidity: 30% - 80% (no condensation)

USB	Standard	USB Specification Revision 2.0

	Port	Upstream port × 1

Main default settings (factory settings)

BrightRegulator

FineContrast Mode

Off Timer

Language

Disable

Custom

Disable

English

Chapter 5 Reference 29

Image 31

Contents Contents Eizo Nanao Corporation To use the monitor comfortably Contents Features Features and OverviewIndicator status Operation status Buttons and IndicatorsOr selecting to decrease it Example Operation methodIcon Function Overview Adjustment menu icon listSelects a language for Utility Disk Disk contents and software overviewConnection To use ScreenManager Pro for LCDDigital Input Screen AdjustmentTo eliminate vertical bars Clock To remove flickering or blurring PhaseTo correct screen position Position To select the display mode FineContrast mode Color AdjustmentMode Purpose Icon Function FineContrast mode To perform advanced adjustmentsAdjustment items in each mode To adjust the brightness BrightnessTo adjust the gamma value Gamma To adjust the contrast ContrastTo adjust the gain value Gain To adjust the color temperature TemperatureTo adjust the color saturation Saturation To set Enable/Disable of the contrast enhancer Cont Enhancer To adjust the hue HueTurning off the monitor automatically Off Timer Adjusting Sharpness SharpnessDisplaying Monitor Infomation Info1 Info2 Locking Buttons Key Lock Menu LockEnabling/Disabling DDC/CI communication DDC/CI Setting Language Language Setting Power Indicator ON/OFF Power LEDDisplaying Eizo logo To reset color adjustment values Resuming the Default Setting ResetTo reset all adjustments to the factory default settings To switch the input signal Connecting Two PCs to the MonitorConnection examples Setting auto-selection of the input signal Input Signal Characters are blurred Problems Possible cause and remedy No pictureMessage below appears Screen is too bright or too darkNoise appears on the screen Adjustment menu does not appearScreen Outline of the letters are coloredAttach the monitor to the arm or stand Attaching an ArmCleaning Power Saving ModeSpecifications Main default settings factory settings Outside Dimensions Height adjustable stand Outside Dimensions Tilt standOutside Dimensions EZ-UP stand Outside Dimensions ArcSwing2 standOption List Connector Pin AssignmentPin No Signal Contact No Signal RemarksGlossary SRGB Standard RGB ResolutionTemperature Tmds Transition Minimized Differential SignalingVertical Hz Preset TimingFrequency Mode Dot clock PolarityFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 4th Edition-March