Eizo S1932 manual Setting auto-selection of the input signal Input Signal

Page 25

●Setting auto-selection of the input signal [Input Signal]

Enable : When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC.

Disable: The monitor does not detect the PC’s signals automatically. Switch an input signal with .

(1)Press .

The adjustment menu appears.

(2)Select (Tool).

(3)The Enable/Disable setting is toggled by selecting (Input Signal).

Enable

Disable

(4)Select .

The mode selected is set.

Note

•When “Enable” is selected for [Input Signal], the monitor’s power-saving function works only when the two PCs are in the power-saving mode.

Chapter 3 Connecting Cables 23

Image 25

Contents Contents Eizo Nanao Corporation To use the monitor comfortably Contents Features Features and OverviewIndicator status Operation status Buttons and IndicatorsOr selecting to decrease it Example Operation methodIcon Function Overview Adjustment menu icon listSelects a language for Utility Disk Disk contents and software overviewConnection To use ScreenManager Pro for LCDDigital Input Screen AdjustmentTo eliminate vertical bars Clock To remove flickering or blurring PhaseTo correct screen position Position To select the display mode FineContrast mode Color AdjustmentMode Purpose Adjustment items in each mode To perform advanced adjustmentsTo adjust the brightness Brightness Icon Function FineContrast modeTo adjust the gamma value Gamma To adjust the contrast ContrastTo adjust the gain value Gain To adjust the color temperature TemperatureTo adjust the color saturation Saturation To set Enable/Disable of the contrast enhancer Cont Enhancer To adjust the hue HueTurning off the monitor automatically Off Timer Adjusting Sharpness SharpnessDisplaying Monitor Infomation Info1 Info2 Locking Buttons Key Lock Menu LockEnabling/Disabling DDC/CI communication DDC/CI Setting Language Language Setting Power Indicator ON/OFF Power LEDDisplaying Eizo logo To reset color adjustment values Resuming the Default Setting ResetTo reset all adjustments to the factory default settings To switch the input signal Connecting Two PCs to the MonitorConnection examples Setting auto-selection of the input signal Input Signal Message below appears Problems Possible cause and remedy No pictureScreen is too bright or too dark Characters are blurredScreen Adjustment menu does not appearOutline of the letters are colored Noise appears on the screenAttach the monitor to the arm or stand Attaching an ArmCleaning Power Saving ModeSpecifications Main default settings factory settings Outside Dimensions Height adjustable stand Outside Dimensions Tilt standOutside Dimensions EZ-UP stand Outside Dimensions ArcSwing2 standPin No Signal Connector Pin AssignmentContact No Signal Remarks Option ListGlossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGBFrequency Mode Dot clock Preset TimingPolarity Vertical HzFor more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 4th Edition-March