Falcon SG3K-2T-HW, SG3K-1T-HW Technical Support, Requesting Technical Information or Support

Page 24

6.Technical Support

Should your FALCON® Electric SG Series UPS require service or you need technical assistance, you can contact us at:

Falcon Electric Inc.

5106 Azusa Canyon Road Irwindale, CA. 91706 Service 800.842.6940 Voice 626.962.7770 Fax 626.962.7720

Email: service@falconups.com

WWW.FALCONUPS.COM

Please have your UPS model, serial numbers and date of purchase on hand prior to your call. This information is located on the identification label on the rear panel of the unit. This information is essential in retrieving your unit’s historical records. Should our service department determine service is required, you will be given a Return Material Authorization number (RMA) along

with return shipping instructions.

The RMA number issued must appear on the outside of the shipping carton. The original shipping container must be used when returning any SG Series product. Falcon® Electric will not assume any responsibility for shipping damage. In the event of shipping damage, you will be notified of the damage and be instructed to file a claim with the freight carrier. You will be billed for all repairs caused by the shipping damage. You must submit a copy of our repair invoice to the carrier for reimbersment.

All units must be returned prepaid. The address and shipping instructions will be given to you at the time the RMA is issued.

7.Requesting Technical Information or Support

You may request technical information or support by email or telephone.

Please send your technical or support questions by email to:

SUPPORT@FALCONUPS.COM

You may contact a FALCON support engineer directly by calling the FALCON support line between 9:00 am and 4:00 pm PST.

800.842.6940

8.FALCON Web Support

Product data sheets, specification and owner’s manuals are available in Adobe® Acrobat .PDF format on our corporate website.

WWW.FALCONUPS.COM

22

Image 24
Contents Owners Operating Manual SG2K-1T-HW SG2K-2T-HW SG3K-1T-HW SG3K-2T-HWTable of Contents SG Series ON-LINE UPS System Block Diagram Important Safety Instructions Chapter General Common for all modelsSelect a suitable location for the UPS SW1 Model Required SG3K-2T-HWTerminal Wiring Designations UPS Output RequirementsDo not USE the Upper Terminal Connections UPS Startup 2KVA- 3KVA UPS Models = 150.0 lbs, 68kg Installation Procedure for Extended Battery Banks Typical Extended Battery Bank & UPS InterconnectionSG 2-3kVA Tower Extended Battery Bank Selection Guide For 2KVA -HW ModelsLoad Level Indicator Leds OperationInverter Indicator LED Audible Alarms Category one alarmsCategory two alarms = UPS Output Voltage is of RangeBattery Fuse Holder SG2K-1T-HW & SG3K-1T-HW Typical Rear Panel OverviewCommunications Interfaces LocationSupported Protocols No on-bypass signal With on-bypass signalTypical Falcon Dry Contact Relay Board No-bypass signal Typical Falcon Opto-coupler Interface CardOpto Board Internal Circuitry APC Style Dry Contact Relay Board APC Style BoardCare & Maintenance Battery Life vs. TemperatureBattery Replacement Storing the UPS and Batteries FCC ConsiderationsTechnical Support Requesting Technical Information or SupportSUPPORT@FALCONUPS.COM 800.842.6940 Falcon Web SupportLimited NEW Product Warranty Agreement General ProvisionsSG SeriesTM UPS Plus