Extreme Networks WM-4T1i manual Configuring a Routed PPP/MLPPP Link Example, Switch #1

PPP/MLPPP Configuration Examples

have the same T1 and PPP configurations. If you change the configuration for a single port, the change will affect the entire group.

VLAN alpha

tag = 1001

Multilink bcp_example encapsulation = BCP

PPP

PPP

PPP

Switch #1

Figure 3-1:BCP multilink example

T1 port 4:1

T1 port 4:2	To
	switch
T1 port 4:3	#2

XM_007

config default delete ports 4:1-4:3 create vlan alpha

config alpha tag 1001 create multilink bcp_example

config ports 4:1-4:3 t1 clocksource internal config bcp_example add ports 4:1-4:3 tag config alpha add multilink bcp_example enable bcp_example

Configuring a Routed PPP/MLPPP Link Example

The following example shows how to configure a IPCP-encapsulated multilink group. The VLAN that contains the IPCP-encapsulated multilink group cannot contain any other ports.

WM-4T1i Module Installation and User Guide 3-7