Hardware Installation
11Rotate the access point chassis 45 degrees
12The access point is ready to configure. For information on basic access point device configuration, see “Basic 4700 Series Configuration” on page 31.
NOTE
If the access point is utilizing remote management antennas, a wire cover can be used to provide a clean finished look to the installation. Contact Extreme Networks for more information.
Above the Ceiling (Plenum) Installations
An above the ceiling installation requires placing the access point above a suspended ceiling and installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of the unit. An above the ceiling installation enables installations compliant with drop ceilings, suspended ceilings and industry standard tiles from .625 to .75 inches thick.
22 | Altitude 4700 Series Access Point Installation Guide |
|
|