Enterasys Networks 2000 manual FCC Notice

Page 3

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment uses, generates, and can radiate radio frequency energy and if not installed in accordance with the operator’s manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference in which case the user will be required to correct the interference at his own expense.

WARNING: Changes or modifications made to this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

INDUSTRY CANADA NOTICE

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limite s applicables aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

VCCI NOTICE

This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

CLASS A ITE NOTICE

WARNING: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

BSMI EMC STATEMENT — TAIWAN

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Enterasys X-Pedition 2000 Getting Started Guide

iii

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 2000 Page FCC Notice Enterasys X-Pedition 2000 Getting Started Guide Enterasys NETWORKS, INC Program License Agreement Enterasys X-Pedition 2000 Getting Started Guide Enterasys X-Pedition 2000 Getting Started Guide Vii Declaration of Conformity Contents Hardware Installation Index Appendix a TroubleshootingContents Xii Enterasys X-Pedition 2000 Getting Started Guide If You Want To See How to Use this GuideWhat’s New Who should Read this Guide?Related Documentation Getting HelpFor Information About See Preface Preface Xvi Enterasys X-Pedition 2000 Getting Started Guide Specifications Chapter Features OverviewIPX RIP, SAP RmonSnmp LLC FeaturesTCP/UDP Services TCP/UDP services TCP Port UDP Port DescriptionBridging Port and Protocol VLANsRouting IP Routing IP Multicast RoutingIPX Routing Security Layer-4 SwitchingVlan Quality of ServiceStatistics Management PlatformsChassis Hardware OverviewStatus LEDs LED Label Description Motherboard FeaturesBoot Flash External ControlsPower Supplies FansRAM Memory 10/100BASE-TX Expansion Module Expansion ModulesCabling and Connector Specifications LEDs100BASE-TX expansion module LEDs Front panel of 100BASE-FX expansion module 100BASE-FX Expansion Module1000BASE-SX Expansion Module BASE-FX expansion module LEDsBASE-SX expansion module LEDs Front panel of 1000BASE-LX expansion module 1000BASE-LX Expansion ModuleBASE-LX expansion module LEDs Front panel of Dual Serial WAN expansion module Dual Serial and Quad Serial C/CE Expansion ModulesDual Serial and Quad Serial C/CE WAN expansion module LEDs Port Type Specification Dual Hssi Line CardHssi LED Page Preventing Injury Safety ConsiderationsPreventing Equipment Damage Hardware SpecificationsInstalling the Hardware XP-2000 physical and environmental specificationsVerifying Your Shipment Installing the Chassis Table-Top InstallationRack Mount Installation Installing the XP-2000 chassis in an equipment rack Installing an Expansion Module Connecting Power to the ChassisInstalling the new face plate view from inside chassis Front of XP-2000 Nteras ys Net works Attaching the Console Management CablesPlugging into the XP-2000’s serial DB-9 DCE port Connecting to the Serial PortPlugging into the XP-2000’s 10/100Base-TX port Connecting to the 10/100Base-TX PortRXD receive data TXD transmit data Attaching Port CablesPlugging an ethernet cable into a 10/100BASE-TX port 100BASE-TX RJ-45 connector 1000BASE-SX and 1000BASE-LX Expansion Modules LFH-60 high density connector pin assignments Pin Signal P1GND P1TXDB P2GND P1TXCA P2CTSB P1RXCAP2SCTEB P1LLA P2RXCA P1GND P2SCTEA P1SHIELD Pin Signal Pin Hssi connector Page Powering On and Booting the Firmware Chapter Firmware Installation SetupAccess Modes Starting the Command Line InterfaceSome commonly used CLI commands Key sequence Command Basic Line Editing CommandsHere is an example Setting Basic System InformationEnter yes or y to activate the changes Enter the copy active to startup command Setting Up Snmp Community StringsSetting Up Snmp Community Strings READ-WRITE Xp-1#system show active-config Setting Up PasswordsXp-1#ping Setting the DNS Domain Name and AddressSystem set dns server IP-address IP-address IP-address Setting Syslog ParametersSetting Syslog Parameters Ping IP-addr Loading System Image Firmware System image add IPaddr-of-TFTP-host image-file-name Enter the system image list command to verify the change Xp-1#system promimage upgrade 10.50.11.12 prom2 Loading Boot Prom FirmwareUpgrading the VFS Viewing the Current Configuration Activating the Configuration Commands in the ScratchpadCommand like stp enable et.*.* would be displayed as follows If you experience this difficulty Try this remedy Appendix a TroubleshootingUse the procedure in Activating the Configuration Appendix B Technical Support Getting Help Dvmrp NumericsIgmp IPX SAPNvram UDP Layer-4 flow 6 services User mode VLANsIndex Enterasys X-Pedition 2000 Getting Started Guide
Related manuals
Manual 188 pages 39.25 Kb

2000 specifications

Enterasys Networks, a key player in the networking space in 2000, was renowned for its innovative solutions that combined high-performance networking with robust security features. Founded with the vision of providing enterprise-level networking infrastructure, Enterasys positioned itself to cater to the growing demands of business networks during the dot-com boom.

One of the main features of Enterasys Networks was its focus on delivering secure, scalable networking solutions that could seamlessly integrate with existing enterprise systems. The company developed a range of products including switches, routers, and wireless solutions that were designed to optimize performance while ensuring security at every layer. Their core offerings provided businesses with the reliability required to handle increasing volumes of data traffic.

A standout technology of Enterasys was its identity and access management solutions. These technologies allowed organizations to control who could access network resources and under what conditions. This was particularly crucial in a time when cyber threats were on the rise, and businesses were becoming more aware of the need for strict network security protocols. The features included role-based access control and authentication measures, which were fundamental in safeguarding sensitive information.

Enterasys also introduced intelligent networking features, which enabled dynamic traffic management and prioritization. This technology helped organizations optimize their network performance by automatically adjusting to changing workload demands. Such capabilities were essential for businesses relying on bandwidth-intensive applications and services.

The company also embraced the rising trend of wireless networking, providing solutions that combined wired and wireless technologies for a unified experience. Enterasys Wireless LAN solutions were groundbreaking at the time, offering seamless connectivity and security to mobile devices, thereby enhancing productivity and flexibility within enterprise environments.

In addition to hardware, Enterasys developed network management software that simplified the administration of complex networks. This software enabled IT professionals to monitor performance, troubleshoot issues, and implement security policies efficiently.

Overall, Enterasys Networks in 2000 was characterized by its commitment to delivering secure, intelligent networking solutions that catered to the needs of modern enterprises. With its innovative technologies and features, Enterasys played a significant role in shaping the networking landscape, laying the groundwork for future advancements in network security and management.
Top Page Image Contents