Enterasys Networks FN 100 manual Component, Port Instance

The FN100 Chassis View

Figure 2-6. Device Find Source Address Window

The Device Find Source Address window displays the following information:

Component

Displays the type of interface through which the specified MAC address is communicating. This field will report Bridge.

Port Instance

Displays the bridge port index number on which the specified MAC address was found.

To use the Device Find Source Address window:

1.In the Address Mode field, select the format of the Source Address you wish to find, either MAC or Canonical.

2.In the Enter Address text box, enter the Source Address you wish to find in the appropriate XX-XX-XX-XX-XX-XX format.

NOTE

If you enter the MAC format of a specified address, and then click on Canonical, NetSight Element Manager will do the address conversion for you, from the Ethernet hexadecimal format to the Token Ring Canonical format. The same is also true if you enter the Canonical format of a specified address and then select MAC.

3.Click on the Find It! button. A “Processing Request” message opens in the status bar at the bottom of the window.

2-12 Managing the Hub