Enterasys Networks 6H308-24, 6H308-48 manual Cpu

Using LANVIEW

Table 4-1describes the LED indications and provides recommended actions as appropriate.

NOTE: The terms flashing, blinking, and solid used in Table 4-1indicate the following: Flashing indicates an LED is flashing randomly.

Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off). Solid indicates a steady LED light. No pulsing.

Table 4-1 LANVIEW LEDs

LED	Color	State	Recommended Action
CPU	Off	Power off.	Ensure chassis has adequate power.
	Red	Blinking. Hardware	Contact Enterasys Networks for technical
		failure has occurred.	support.
		Solid. Resetting, normal	If the LED remains red for several minutes,
		power up reset.	contact Enterasys Networks for technical
			support.
	Amber	Blinking. Crippled.	Contact Enterasys Networks for technical
			support.
		Solid. Testing.	If the LED remains amber for more than
			several minutes, contact Enterasys
			Networks for technical support.
	Green	Solid. Functional.	None.
	Amber	Booting. Blinks amber	None.
	and	and green while booting.
	Green

4-2Troubleshooting