Enterasys Networks 6H308-48, 6H308-24 manual Installing the Flash Module

FLASH Upgrade

B.3.2 Installing the FLASH Module

CAUTION: Observe all antistatic precautions when handling sensitive electronic equipment.

To install a FLASH module, refer to Figure B-3and proceed as follows:

1.With the FLASH module oriented as shown in Figure B-3, insert the FLASH module down between the connector.

2.Pivot the FLASH module downward so the connector clips align with the two side notches of the FLASH module and the connector clips lock the FLASH module into place.

Figure B-3 Installing the FLASH

FLASH 2

Connector Clip

1

Clip

2504_91

Mode Switch Bank Settings and Options B-5