Enterasys Networks B2G124-24 manual How to Use This Guide, Related Documents, For Refer to

How to Use This Guide

How to Use This Guide

Read through this guide completely to familiarize yourself with its contents and gain an understanding of the features and capabilities of the stackable Ethernet switches. A general knowledge of data communications networks is helpful when setting up the switches.

This preface provides an overview of this guide and the SecureStack B2 manual set, a brief summary of each chapter and defines the conventions used throughout this guide. To locate information concerning various subjects in this guide, refer to the following table:

For...	Refer to...
An overview of the switch features and how to	Chapter 1, Introduction
obtain technical support
Network requirements that must be met before	Chapter 2, Network Requirements
installing the switch
Instructions to install the switch on a flat surface	Chapter 3, Hardware Installation
or in a standard 19-inch rack and configure the
switch in a stacked configuration
Troubleshooting installation problems and	Chapter 4, Troubleshooting
diagnosing network/operational problems using
the LANVIEW LEDs
Specifications, environmental requirements, and	Appendix A, Specifications
physical properties of the switch and optional
Mini-GBICs

Related Documents

The manuals listed above can be obtained from the World Wide Web in Adobe Acrobat Portable Document Format (PDF) at the following site:

http://www.enterasys.com/support/manuals

•SecureStack B2 Configuration Guide describes how to use the Command Line Interface (CLI) to set up and manage the B2 switches.

•Cabling Guide provides information concerning network cabling, dB loss, and other cabling specifications and usage.

Unlike the SecureStack B2 Configuration Guide, the Cabling Guide is not listed alphabetically on the web site. Instead, it is under the Overview Guides link.

xvi About This Guide