Management
Management
Management of the module can be either in‐band or out‐of‐band. In‐band remote management is possible using Telnet, Enterasys Networks’ NetSight® management application, or the WebView application. Out‐of‐band management is provided through the DB9 Console port connector on the front panel using a VT100 terminal or a VT100 terminal emulator.
Switch Configuration Using WebView
Enterasys Networks’ HTTP‐based Web management application (WebView) is an intuitive web tool for simple management tasks.
Switch Configuration Using CLI Commands
The CLI commands enable you to perform more complete switch configuration management tasks.
For CLI command set information and how to configure the module, refer to the SecureStack B2 Configuration Guide.
Standards Compatibility
The 1000BASE‐T ports are compliant with the following standards and operations:
•IEEE 802.3
•IEEE 802.3u
•IEEE 802.3ab
•Full‐Duplex operation
The SFP ports are compliant with the following standards and operations:
•IEEE 802.3z
•IEEE 802.3x Flow Control support for Full‐Duplex mode
•Auto‐negotiation for Full‐Duplex control operations
LANVIEW Diagnostic LEDs
LANVIEW diagnostic LEDs serve as an important troubleshooting aid by providing an easy way to observe the status of individual ports and overall network operations.
SecureStack B2 Installation Guide