Changing the Network Configuration
Use the Network Configuration menu to set the bootup option, configure the switch’s Internet Protocol (IP) parameters, enable the
Vertical Horizon Local Management
Network Configuration
IP Configuration ...
IP Connectivity Test (Ping) ...
HTTP Configuration ...
MAX Number of allowed Telnet sessions (1
Physical Address :
|
| <APPLY> | <OK> | <CANCEL> | |
| Use <TAB> or arrow keys to move. <Enter> to select. | ||||
|
|
|
| ||
|
| Figure | |||
|
|
|
|
| |
Parameter | Description |
|
|
| |
IP Configuration | Screen used to set the bootup option, or configure the switch’s IP | ||||
|
| parameters. |
|
|
|
IP Connectivity Test | Screen used to test IP connectivity to a (Ping) specified device. | ||||
HTTP Configuration | Screen used to enable the Web server. | ||||
MAX Number of | The maximum number of Telnet sessions allowed to | ||||
Allowed Telnet | simultaneously access the switch. | ||||
Sessions |
|
|
|
| |
Physical Address | MAC address of the switch. |
|
|
9033640 |