Enterasys Networks VH-8G manual Configuring IP Trap Managers

Configuring IP Trap Managers

The following figure and table describe how to specify management stations that will receive authentication failure messages or other trap messages from the switch. Up to 5 trap managers may be entered.

Vertical Horizon Local Management -- VH-8G

		SNMP Configuration : IP Trap Managers
		IP Address		Community Name	Status
		1. 10.1.0.23		public	DISABLED
		2.
		3.
		4.
		5.
		<APPLY>	<OK>	<CANCEL>
	Use <TAB> or arrow keys to move, other keys to make changes.
		Figure 2-14. IP Trap Managers
Parameter		Description
IP Address		IP address of the trap manager.
Community Name		A community specified for trap management access.
Status		Sets administrative status of selected entry to enabled or
		disabled.

20 VH-8G User Interface VH-8G