Parameter | Default | Description |
FastForwarding | ENABLED | This parameter is used to enable/disabled the |
|
| Fast Spanning Tree mode for the port. In this |
|
| mode, ports skip the Blocked, Listening and |
|
| Learning states and proceed straight to |
|
| Forwarding. |
|
| FastForwarding enables |
|
| and servers to overcome |
|
| the Spanning Tree Algorithm is implemented in a |
|
| network. Therefore, FastForwarding should only |
|
| be enabled for ports that are connected to an end- |
|
| node device. |
Viewing the Current Spanning Tree Configuration
The Spanning Tree Information screen displays a summary of the STA information for the overall bridge or for a specific port. To make any changes to the parameters for the Spanning Tree, use the Spanning Tree Configuration menu.
Vertical Horizon Local Management
Spanning Tree Information : Selection Menu
STA Bridge Information ...
STA Port Information ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Figure 2-25. Spanning Tree Information
32 |