Enterasys Networks VH-8G manual Configuring Bridge MIB Extensions, Extended Bridge Configuration

Configuring Bridge MIB Extensions

The Bridge MIB includes extensions for managed devices that support Traffic Classes, Multicast Filtering and Virtual LANs. To configure these extensions, use the Extended Bridge Configuration screen as shown below:

Vertical Horizon Local Management -- VH-8G

		Extended Bridge Configuration
		Bridge Capability : (Read Only)
		Extended Multicast Filtering Services: NO
		Traffic Classes		: YES
		Static Entry Individual Port		: YES
		Configurable PVID Tagging		: YES
		Local VLAN Capable		: NO
		Bridge Settings :
		Traffic Class		: TRUE
		VLAN Learning		: SVL
		GMRP		: DISABLED
		GVRP		: DISABLED
		<APPLY>	<OK>	<CANCEL>
	Use <TAB> or arrow keys to move. <Space> to scroll options.
	Figure 2-32. Extended Bridge Configuration
Parameter		Description
Bridge Capability
Extended Multicast		Indicates that the switch does not support the filtering of individual
Filtering Services		multicast addresses based on GMRP (GARP Multicast
		Registration Protocol). Note that this function is not implemented
		for the current firmware release.
Traffic Classes		Indicates that the switch provides mapping of user priorities to
		multiple traffic classes. (Refer to 802.1P Configuration.)
Static Entry		Indicates that the switch allows the static filtering for unicast and
Individual Port		multicast addresses. (Refer to Network Monitor Menu / Static
		Unicast Address Table Configuration and Static Multicast
		Address Table Configuration.)
Configurable		Indicates that the switch allows you to override the default PVID
PVID Tagging		setting (Port VLAN ID used in frame tags) and its egress status
		(VLAN-Tagged or Untagged) on each port. (Refer to Port
		Assignment VLAN Configuration.)
Local VLAN		This switch does not support multiple local bridges (that is,
Capable		multiple Spanning Trees).

42 VH-8G User Interface VH-8G