Enterasys Networks RBT-8110 manual Optionally, enable Telnet

Wireless Switch Configuration Tasks

Do you want Web Portal authentication? [y]: y

Enter a username to be used with Web Portal, <cr> to exit: user1

Enter a password for user1: user1pass

Enter a username to be used with Web Portal, <cr> to exit: Do you want to do 802.1x and PEAP-MSCHAPv2? [y]: y

Enter a crypto SSID to use: corporate

Enter a username with which to do PEAP-MSCHAPv2, <cr> to exit: bob

Enter a password for bob: bobpass

Enter a username with which to do PEAP-MSCHAPv2, <cr> to exit: Do you wish to configure access points? [y]: y

Enter a port number [1-2] on which an AP resides, <cr> to exit: 2

Enter AP model on port 2: RBT-1602

Enter a port number [1-2] on which an AP resides, <cr> to exit: Do you wish to configure distributed access points? [y]: y Enter a DAP serial number, <cr> to exit: 123456789

Enter model of DAP with S/N 123456789: RBT-1602 Enter a DAP serial number, <cr> to exit: success: created keypair for ssh

success: Type "save config" to save the configuration RBT-8110-aabbcc# save config

RBT-8110#

6.Optionally, enable Telnet.

RBT-8110#set ip telnet server enable

7.Verify the configuration changes.

RBT-8110#show config

8.Save the configuration changes.

RBT-8110#save config

3-4 Configuration