Rack Mounting the Switch
Figure 3-5 Attaching the Rackmount Brackets
1 Rackmount brackets | 2 M3 x 6 mm flathead screws |
2.With the mounting brackets attached, position the switch between the vertical frame members of the 19‐inch rack as shown in Figure 3‐6. Then fasten the switch securely to the frame using four mounting screws (user supplied).
Figure 3-6 Fastening the Switch to the Rack
1 Rails of | 2 Mounting screws (supplied by user) |
3.If you are installing this switch in a stacked configuration, repeat this procedure for each switch until all switches have been installed in the stack, then proceed to “Connecting High‐Speed Stacking Cables” on page 3‐11. Otherwise, proceed to “Connecting AC and PoE Power” on page 3‐15.