Enterasys Networks B3G124-48P, B3G124-24P manual Using the Reset Switch

Using the Reset Switch

To reset the switch password, refer to Figure 4‐3 and proceed as follows:

Note: Notify the system manager before changing the password.

1.Press‐and‐hold the Reset switch while the switch device is operational. This change of the login password to the default password will be indicated through CLI only.

2.Logon to device management. You can now logon to the switch through the Console port and assign a new password using the command line interface (CLI).

3.To access switch management from your local PC, terminal, or modem connection, refer to the SecureStack B3 Configuration Guide for instructions on how to log in and enter a new password. The guide is available at:

http://www.enterasys.com/support/manuals

If you require assistance, contact Enterasys Networks using one of the methods described in “Getting Help” on page xviii.

SecureStack B3 Installation Guide 4-9