Installing Optional
Installing a Mini-GBIC
To install a Mini‐GBIC that has an MT‐RJ connector, refer to Figure 3‐1, or for a Mini‐GBIC with an LC connector, refer to Figure 3‐2, and proceed as follows:
1.Hold the Mini‐GBIC with the top side positioned as shown, and the 7‐pin edge connector facing the port slot.
2.Carefully align the Mini‐GBIC with the port slot.
3.Push the Mini‐GBIC into the port slot until the Mini‐GBIC “clicks” and locks into place.
Figure 3-1 Mini-GBIC with MT-RJ Connector
1 | 4 | Port slot | |
2 | 5 | Protective dust cover | |
3 | 6 | Release tab |