Enterasys Networks 2G4072-52 manual Structure of This Guide, Related Documents, For Refer to

Structure of This Guide

Structure of This Guide

This preface provides an overview of this guide, explains the symbols used throughout this guide, and instructs how to obtain technical support from Enterasys Networks.

This guide provides information about the following:

For...	Refer to...
An overview of the 2G4072‐52	Chapter 1, Introduction
Network requirements that must be met	Chapter 2, Network Requirements
before installing the 2G4072‐52
Installation instructions for the 2G4072‐52	Chapter 3, Installation
hardware
Troubleshooting installation problems and	Chapter 4, Troubleshooting
diagnosing network/operational problems
using the LANVIEW LEDs
Specifications, environmental requirements,	Appendix A, Specifications
and physical properties of the 2G4072‐52 and
Mini‐GBICs
Instructions to set the mode switches when	Appendix B, Mode Switch Bank
necessary and to remove and replace DIMM	Settings and Optional Installations
and DRAM SIMM memory

Related Documents

The manuals listed below can be obtained from the World Wide Web in Adobe Acrobat Portable Document Format (PDF) at the following site:

http://www.enterasys.com/support/manuals

•Enterasys Matrix N Standalone Series Configuration Guide provides information on how to use the Command Line Interface to set up and manage the DFE modules.

•Cabling Guide provides information on dB loss and cable specifications.

Unlike the Enterasys Matrix N Standalone Series Configuration Guide, the Cabling Guide is not listed alphabetically on the web site. Instead, it is listed under the Overview Guides link.

xvi Preface