Dish Network HOME NETWORK manual Home Network, Installation Instructions

Page 1

Home Network

Home Network

Installation Instructions

TM

Image 1

Contents Installation Instructions Home NetworkTable of Contents Installation InstructionsInstallation Considerations Quick Installation InstructionsOverview Quick Installation InstructionsIdentifying the Home Network and Receiver Connection Method Identifying and Creating the Home Network and Available Ethernet PortFigure 4. Identifying Ethernet Switch or Hub No. Go to Adding an Ethernet Switch on pageFigure 5. Identifying Available Ethernet Port on Switch or Hub Figure 3. Identifying Available Ethernet PortAdding an Ethernet Switch Installation and SetupDiagram 1. Overview of Home Network with Ethernet Switch Connected Diagram 2. Connecting an Ethernet Switch to the RouterINTERNET, or WAN Diagram 4. Connecting the Receiver to the Router Using Ethernet Cable Connecting the Satellite Receiver to an Available Ethernet PortEthernet Port Ethernet Port One HomePlug-to-Ethernet adapter must be obtained for use at the location of the router, gateway, or Ethernet switch. One adapter supports up to 15 receivers. The ViP-series of DISH Network receivers include HomePlug 1.0 support. HomePlug Turbo adapters can also be used Select Done to exit the Network Setup screen Diagnostics Screen Using DishONLINE New Releases and DISH Theater Procedure TroubleshootingHomePlug Troubleshooting section on page DescriptionNetwork Setup. Select Reset Connection address on the receiver’s Network Setup screen shows all 0s on pageHomePlug 156342