Dish Network HOME NETWORK Installation Instructions, Table of Contents, Overview, My Rentals

Page 2
Installation Instructions

Page 1

Image 2
Contents Home Network Installation InstructionsInstallation Considerations Installation InstructionsTable of Contents Quick Installation InstructionsQuick Installation Instructions OverviewIdentifying and Creating the Home Network and Available Ethernet Port Identifying the Home Network and Receiver Connection MethodFigure 5. Identifying Available Ethernet Port on Switch or Hub No. Go to Adding an Ethernet Switch on pageFigure 4. Identifying Ethernet Switch or Hub Figure 3. Identifying Available Ethernet PortDiagram 1. Overview of Home Network with Ethernet Switch Connected Installation and SetupAdding an Ethernet Switch Diagram 2. Connecting an Ethernet Switch to the RouterINTERNET, or WAN Connecting the Satellite Receiver to an Available Ethernet Port Diagram 4. Connecting the Receiver to the Router Using Ethernet CableEthernet Port Ethernet Port One HomePlug-to-Ethernet adapter must be obtained for use at the location of the router, gateway, or Ethernet switch. One adapter supports up to 15 receivers. The ViP-series of DISH Network receivers include HomePlug 1.0 support. HomePlug Turbo adapters can also be used Select Done to exit the Network Setup screen Diagnostics Screen Using DishONLINE Searching for DishONLINE Programs HomePlug Troubleshooting section on page TroubleshootingProcedure Descriptionaddress on the receiver’s Network Setup screen shows all 0s on page Network Setup. Select Reset ConnectionHomePlug 156342