Dish Network HOME NETWORK Page, Description, Procedure, Network Setup. Select Reset Connection

Contents Home Network Installation InstructionsInstallation Instructions Table of ContentsInstallation Considerations Quick Installation InstructionsQuick Installation Instructions OverviewIdentifying and Creating the Home Network and Available Ethernet Port Identifying the Home Network and Receiver Connection MethodNo. Go to Adding an Ethernet Switch on page Figure 4. Identifying Ethernet Switch or HubFigure 5. Identifying Available Ethernet Port on Switch or Hub Figure 3. Identifying Available Ethernet PortInstallation and Setup Adding an Ethernet SwitchDiagram 1. Overview of Home Network with Ethernet Switch Connected Diagram 2. Connecting an Ethernet Switch to the RouterINTERNET, or WAN Connecting the Satellite Receiver to an Available Ethernet Port Diagram 4. Connecting the Receiver to the Router Using Ethernet CableEthernet Port Ethernet Port One HomePlug-to-Ethernet adapter must be obtained for use at the location of the router, gateway, or Ethernet switch. One adapter supports up to 15 receivers. The ViP-series of DISH Network receivers include HomePlug 1.0 support. HomePlug Turbo adapters can also be used Select Done to exit the Network Setup screen Diagnostics Screen Using DishONLINE Download List Troubleshooting ProcedureHomePlug Troubleshooting section on page Descriptionaddress on the receiver’s Network Setup screen shows all 0s on page Network Setup. Select Reset ConnectionHomePlug 156342