Edimax Technology Wireless VPN Broadband Router user manual Cable Modem

Page 17

Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2, 1.3, 1.4, 1.5 or 1.6). Click on Back to return to the previous screen.

1.1 Cable Modem

Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP’s may also require that you fill in additional information such as Host Name and MAC address (see screen below).

Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require these settings for you to connect to the Internet.

Parameters	Description
Host Name	If your ISP requires a Host Name, type in the host
	name provided by your ISP, otherwise leave it blank if
	your ISP does not require a Host Name.
MAC Address	Your ISP may require a particular MAC address in
	order for you to connect to the Internet. This MAC
	address is the PC’s MAC address that your ISP had
	originally connected your Internet connection to. Type
	in this MAC address in this section or use the “Clone
	MAC Address” button to replace the WAN MAC
	16

Image 17

Contents User’s Manual Page NAT Minimum Requirements FeaturesPackage Content Get to know the Broadband Router Back Panel ResetLocal Area Network LAN Wide Area Network WANLight Status Description Front PanelGetting started Setup DiagramConfigure your PC to obtain an IP address automatically DNS Configuration Select Disable DNS 2b Windows XP 2c Windows IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTPage General Setup Chapter Quick Setup Wizard ChapterStatus Info. Chapter Quick SetupSystem Tools Chapter Time ZoneBroadband Type L2TP PptpCable Modem DNS Fixed-IP xDSLPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Telstra Big Pond Turn OFF the Router When YOU Finished Using the InternetGeneral Settings LAN WANSystem NATTime Zone Password Settings Remote Management WAN Page Dynamic IP Wireless ISPStatic IP Address PPPoE PPP over EthernetPage Ddns LAN IP LANWireless Setting Basic SettingsWlan MAC EssidAdvanced Settings Page Security IappWEP only 3.2 802.1x only WPA Pre-shared key 3.3 802.1x WEP Static keyWPA2AES WpatkipWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Special Applications Example Virtual ServerPage Example Example Special ApplicationsUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Example Access Control Client PC ServiceURL Blocking Intrusion Detection Feature DoS Denial of Service4 DMZ VPN Status Status and Information Primary DNS and Secondary DNS being used Internet ConnectionDevice Status System Log Security Log Active Dhcp Client Statistics Tool Restore to Factory Defaults tool to force Configuration ToolsFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page TCP TCP FTP Smtp POP3Snmp UCP UDP