Edimax Technology Wireless VPN Broadband Router user manual ALG Settings

Page 63

provided by UPnP can let applications that support UPnP smoothly connect to Internet sites without any incompatibility problem due to the NAPT port translation.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

2.6.5 ALG Settings

You can select applications that need “Application Layer Gateway” to support.

Parameters

Default

Description

Enable

 

You can select to enable “Application Layer

 

 

Gateway”, then the router will let that

 

 

application correctly pass though the NAT

 

 

gateway.

 

 

 

62

Image 63
Contents User’s Manual Page NAT Features Package ContentMinimum Requirements Wide Area Network WAN ResetGet to know the Broadband Router Back Panel Local Area Network LANLight Status Description Front PanelSetup Diagram Configure your PC to obtain an IP address automaticallyGetting started DNS Configuration Select Disable DNS 2b Windows XP 2c Windows IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTPage General Setup Chapter Quick Setup Wizard ChapterTime Zone Quick SetupStatus Info. Chapter System Tools ChapterBroadband Type L2TP PptpCable Modem DNS Fixed-IP xDSLPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Telstra Big Pond Turn OFF the Router When YOU Finished Using the InternetGeneral Settings LAN WANSystem NATTime Zone Password Settings Remote Management WAN Page PPPoE PPP over Ethernet Wireless ISPDynamic IP Static IP AddressPage Ddns LAN IP LANWireless Setting Basic SettingsWlan MAC EssidAdvanced Settings Page Security IappWEP only 3.2 802.1x only WPA Pre-shared key 3.3 802.1x WEP Static keyWPA2AES WpatkipWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Special Applications Example Virtual ServerPage Example Example Special ApplicationsUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Example Access Control Client PC ServiceURL Blocking Intrusion Detection Feature DoS Denial of Service4 DMZ VPN Status Status and Information Primary DNS and Secondary DNS being used Internet ConnectionDevice Status System Log Security Log Active Dhcp Client Statistics Tool Restore to Factory Defaults tool to force Configuration ToolsFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page UDP TCP FTP Smtp POP3TCP Snmp UCP