| Note: You need to give your LAN PC clients a |
| fixed/static IP address for the Access Control |
| rule to work properly. |
Client PC Service | You can block the clients from accessing some |
| Internet services by checking the services you |
| want to block. |
Protocol | This allows you to select UDP, TCP or both |
| protocol type you want to block. |
Port Range | It can be assign up to five port ranges. The |
| router will block clients from accessing Internet |
| services that use these ports. |
Apply Changes | Click “Apply Changes” to save the setting. |
Reset | Click “Reset” to clear all fields. |
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
Example: Access Control
In the example below, LAN client A can only access websites that use Port
80.However, LAN client B is able to access websites and any other service that uses ports between 80 and 999.
68