Edimax Technology Wireless VPN Broadband Router user manual Pptp, L2TP

Page 16

In this section you have to select one of four types of connections that you will be using to connect your broadband router’s WAN port to your ISP (see screen below).

Note: Different ISP’s require different methods of connecting to the Internet, please check with your ISP as to the type of connection it requires.

Menu		Description
1.1	Cable Modem	Your ISP will automatically give you an IP
		address
1.2	Fixed-IP xDSL	Your ISP has given you an IP address already
1.3	PPPoE	Your ISP requires you to use a Point-to-Point
		Protocol over Ethernet (PPPoE) connection.
1.4	PPTP	Your ISP requires you to use a Point-to-Point
		Tunneling Protocol (PPTP) connection.
1.5	L2TP	Your ISP requires you to use a Layer Two
		Tunneling Protocol (L2TP) connection.
1.6	Telstra Big Pond	This Protocol only used for Australia’s ISP
		connection.

		15

Image 16

Contents User’s Manual Page NAT Package Content FeaturesMinimum Requirements Reset Get to know the Broadband Router Back PanelLocal Area Network LAN Wide Area Network WANFront Panel Light Status DescriptionConfigure your PC to obtain an IP address automatically Setup DiagramGetting started DNS Configuration Select Disable DNS 2b Windows XP 2c Windows 2d Windows NT IP Address Select Obtain an IP address from a Dhcp serverPage Quick Setup Wizard Chapter General Setup ChapterQuick Setup Status Info. ChapterSystem Tools Chapter Time ZoneBroadband Type Pptp L2TPCable Modem Fixed-IP xDSL DNSPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Turn OFF the Router When YOU Finished Using the Internet Telstra Big PondGeneral Settings WAN LANNAT SystemTime Zone Password Settings Remote Management WAN Page Wireless ISP Dynamic IPStatic IP Address PPPoE PPP over EthernetPage Ddns LAN LAN IPWireless Basic Settings SettingEssid Wlan MACAdvanced Settings Page Iapp SecurityWEP only 3.2 802.1x only 3.3 802.1x WEP Static key WPA Pre-shared keyWpatkip WPA2AESWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Example Virtual Server Special ApplicationsPage Example Special Applications ExampleUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Client PC Service Example Access ControlURL Blocking DoS Denial of Service Intrusion Detection Feature4 DMZ VPN Status Status and Information Internet Connection Primary DNS and Secondary DNS being usedDevice Status System Log Security Log Active Dhcp Client Statistics Tool Configuration Tools Restore to Factory Defaults tool to forceFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page TCP FTP Smtp POP3 TCPSnmp UCP UDP