Edimax Technology Wireless VPN Broadband Router user manual Configuration Tools

Page 83

4.1 Configuration Tools

The Configuration Tools screen allows you to save (Backup) the router’s current configuration setting. Saving the configuration settings provides an added protection and convenience should problems occur with the router and you have to reset to factory default. When you save the configuration setting (Backup) you can re-load the saved configuration into the router through the Restore selection. If extreme problems occur you can use the Restore to Factory Defaults selection, this will set all configurations to its original default settings (e.g. when you first purchased the router).

Parameters	Description
Configuration Tools	Use the "Backup" tool to save the Broadband
	router current configuration to a file named
	"config.bin" on your PC. You can then use the
	"Restore" tool to restore the saved configuration to
	the Broadband router. Alternatively, you can use
	the "Restore to Factory Defaults" tool to force the
	Broadband router to perform a power reset and
	restore the original factory settings.

82

Image 83

Contents User’s Manual Page NAT Minimum Requirements FeaturesPackage Content Wide Area Network WAN ResetGet to know the Broadband Router Back Panel Local Area Network LANLight Status Description Front PanelGetting started Setup DiagramConfigure your PC to obtain an IP address automatically DNS Configuration Select Disable DNS 2b Windows XP 2c Windows IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTPage General Setup Chapter Quick Setup Wizard ChapterTime Zone Quick SetupStatus Info. Chapter System Tools ChapterBroadband Type L2TP PptpCable Modem DNS Fixed-IP xDSLPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Telstra Big Pond Turn OFF the Router When YOU Finished Using the InternetGeneral Settings LAN WANSystem NATTime Zone Password Settings Remote Management WAN Page PPPoE PPP over Ethernet Wireless ISPDynamic IP Static IP AddressPage Ddns LAN IP LANWireless Setting Basic SettingsWlan MAC EssidAdvanced Settings Page Security IappWEP only 3.2 802.1x only WPA Pre-shared key 3.3 802.1x WEP Static keyWPA2AES WpatkipWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Special Applications Example Virtual ServerPage Example Example Special ApplicationsUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Example Access Control Client PC ServiceURL Blocking Intrusion Detection Feature DoS Denial of Service4 DMZ VPN Status Status and Information Primary DNS and Secondary DNS being used Internet ConnectionDevice Status System Log Security Log Active Dhcp Client Statistics Tool Restore to Factory Defaults tool to force Configuration ToolsFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page UDP TCP FTP Smtp POP3TCP Snmp UCP