Edimax Technology PS-1206MFG manual MFP Server List

MFP Server List
MFP Server List	The “MFP Server List” will list all the MFP Servers within
	the network. You can find information about the MFP
	Server including “MFP Server Name”, “MAC ID”, “IP
	Address” and the device that is connected to the MFP
	Server.
MFP Server/MFP	When you are clicking on the “MFP Server” in the “MFP
Information	Server List”, you will see the “MFP Server Description”
	and the “Idle Timeout” setting for the MFP Server.
	MFP Server Description – It is a description that can
	help users to identify where or what the MFP Server is.
	Idle Timeout – From here, each user can know his/her
	auto release setting. To avoid occupying the all-in-one
	printer overtime, each user is recommended to enable
	the “Auto Release” setting at the bottom of the “MFP
	Manager” utility. It is used to automatically disconnect the
	connection after the all-in-one printer is idle for a specified
	period of time. By default, it is enabled to release the
	all-in-one printer five minutes.
	When you are clicking on the “all-in-one printer” in the
	“MFP Server List”, you will see the information including
	“Status”, “Computer Name” and “Contact Information”.
	Status – It displays the status of the all-in-one printer
	including Connected, Idle and Busy. When the status is
	“Connected”, it indicates that you are connecting the
	all-in-one printer. When the status is “Idle”, it indicates
	that the all-in-one printer is not being used. When the
	status is “Busy”, it indicates that another user is using the
	all-in-one printer to scan, print, etc.

11