Edimax Technology PS-1206MFG manual Web Management, IP Address User Name Admin Password

Page 40

6.Web Management

6.1Introduction

The MFP Server can be configured and managed on the Web. Through the Local Area Network, or even the Internet, the administrator can easily configure and manage MFP Server’s various main functions in a browser. Simply enter the MFP Server’s IP address into your browser’s address field to manage a MFP Server by through its built-in Web Server.

The default IP Address, User Name and Password settings of the MFP Server are as follows.

IP Address: 192.168.2.2

User Name: Admin

Password: 1234

29

Image 40
Contents Page Page Federal Communication Commission Interference Statement FCC WarningRadio Frequency Interference Requirements Country Code Setting Disable RSS-210 Compliance StatementTransmitter Antenna IC Radiation Exposure StatementSafety TTE Compliance StatementEU Countries Intended for Use CE Mark WarningRegulatory Approvals for AC Adapter Safety Information EpsonPage Contents Troubleshooting Introduction All-in-one MFP Server Mode MFP Server ModesMFP Server Mode Using Your All-in-one in MAC Page Printing Scanning MAC Scanning Utility Reading Memory Cards MFP Manager in MAC MFP Server ListMFP Server List MFP Server List Option Settings General SettingSearch for MFP Server Server Configuration in MAC IntroductionSearch for All Available MFP Server Status of MFP Server Page General Setting Page IP Address Assignment TCP/IP ConfigurationIP Address Subnet Mask System Configuration Wireless Configuration Page WEP Security Mode Page WPA-PSK/WPA2-PSK Security Mode Page IP Address User Name Admin Password Web ManagementLogin Device Status System StatusPrinter Status 3 TCP/IP Status Admin Password Setup WizardSystem Page Advanced Settings Wireless Page Site Survey Encryption Page WPA-PSK Mode WPA2-PSK Mode Security Mode 3 TCP/IP Save Settings Load Default System ToolsUpgrade Firmware Troubleshooting