Edimax Technology PS-1206MFG manual System Configuration

Page 33

5.6System Configuration

Double click the “System” button. The System configuration window will pop up. In the System configuration page, you can upgrade the firmware, reset to factory default, reboot the system or set the force release port for this MFP Server.

Firmware Upgrade: You can use this “Firmware Upgrade” tool to update to

the newest firmware of the MFP Server. Click “” button and select the correct firmware in your PC. After selecting the firmware file click

” button to activate the firmware update process.

Tip: Before you upgrade the firmware, please make sure that the IP Address settings of the MFP Server are in the same network as your computer.

Reset to Default: If you want to reset the MFP Server to default factory settings, please click “OK”.

System Reboot: If you want to reboot the MFP Server, please click ‘’System Reboot’’.

Force Release: Click “Force Release” to help you disconnect the current connection between the user and the connected device. This is very useful when a user forgets to disconnect the all-in-one printer. The administrator can release the connection and let the all-in-one printer be free to use.

22

Image 33
Contents Page Page FCC Warning Federal Communication Commission Interference StatementRadio Frequency Interference Requirements RSS-210 Compliance Statement Country Code Setting DisableTransmitter Antenna IC Radiation Exposure StatementTTE Compliance Statement SafetyEU Countries Intended for Use CE Mark WarningRegulatory Approvals for AC Adapter Epson Safety InformationPage Contents Troubleshooting Introduction MFP Server Modes All-in-one MFP Server ModeMFP Server Mode Using Your All-in-one in MAC Page Printing Scanning MAC Scanning Utility Reading Memory Cards MFP Server List MFP Manager in MACMFP Server List MFP Server List General Setting Option SettingsSearch for MFP Server Introduction Server Configuration in MACSearch for All Available MFP Server Status of MFP Server Page General Setting Page TCP/IP Configuration IP Address AssignmentIP Address Subnet Mask System Configuration Wireless Configuration Page WEP Security Mode Page WPA-PSK/WPA2-PSK Security Mode Page Web Management IP Address User Name Admin PasswordLogin System Status Device StatusPrinter Status 3 TCP/IP Status Setup Wizard Admin PasswordSystem Page Advanced Settings Wireless Page Site Survey Encryption Page WPA-PSK Mode WPA2-PSK Mode Security Mode 3 TCP/IP Save Settings System Tools Load DefaultUpgrade Firmware Troubleshooting