Dell N2048, N3024 manual Mlag Peer D Mlag Peer E Description of commands, Lag

MLAG Peer B	MLAG Peer C	Description of commands
interface gigabitethernet 1/0/1	interface gigabitethernet 1/0/1	 Assign interfaces to connect
channel-group 40 mode active	channel-group 40 mode active	to partner E’s half of full mesh
description "MLAG-Partner-Link"	description "MLAG-Partner-Link"	LAG
exit	exit
interface gigabitethernet 1/0/2	interface gigabitethernet 1/0/2	 Assign interfaces to connect
channel-group 40 mode active	channel-group 40 mode active	to partner D’s half of full mesh
description "MLAG-Partner-Link"	description "MLAG-Partner-Link"	LAG
exit	exit
interface gigabitethernet 1/0/14	interface gigabitethernet 1/0/13	 Assign interfaces to VLAN that
channel-group 50 mode active	channel-group 50 mode active	will connect to partner A’s LAG
switchport mode trunk	switchport mode trunk
switchport trunk allowed vlan 30	switchport trunk allowed vlan 30	-put both 13 and 14 into same
exit	exit	LAG 50
feature vpc	feature vpc	 Enable the MLAG
vpc domain 1	vpc domain 1
peer-keepalive enable	peer-keepalive enable
exit	exit

MLAG Peer D	MLAG Peer E	Description of commands
configure	configure
vlan 30	vlan 30	 Create a VLAN for MLAG and
exit	exit	all partner traffic
interface port-channel 1	interface port-channel 1	 Configure the port channel for
description "MLAG-Peer-Link"	description "MLAG-Peer-Link"	the DE peer link
spanning-tree disable	spanning-tree disable	- must be trunk mode
switchport mode trunk	switchport mode trunk
vpc peer-link	vpc peer-link
exit	exit
interface tengigabitethernet 1/0/1	interface tengigabitethernet 1/0/1	 Identify and configure the DE
channel-group 1 mode active	channel-group 1 mode active	peer link interfaces
description "MLAG-Peer-Link"	description "MLAG-Peer-Link"
exit	exit
interface port-channel 40	interface port-channel 40	 Create a LAG (port-channel)
switchport mode trunk	switchport mode trunk	for partner switch BC to pass
switchport trunk native vlan 30	switchport trunk native vlan 30	traffic
vpc 40	vpc 40	 Assign a unique id for partner
exit	exit	switch BC
interface port-channel 60	interface port-channel 60	 Create a LAG (port-channel)
switchport mode trunk	switchport mode trunk	for partner switch F to pass traffic
switchport trunk native vlan 30	switchport trunk native vlan 30
vpc 60	vpc 60	 Assign a unique id for partner
exit	exit	switch F
interface gigabitethernet 1/0/1	interface gigabitethernet 1/0/1	 Assign interfaces to connect
channel-group 40 mode active	channel-group 40 mode active	to partner B ‘s half of full mesh

15 Using MLAG in Dell Networks

.