Cypress CY62147DV18 manual Features, Functional Description1, Cypress Semiconductor Corporation

CY62147DV18

MoBL2™

4-Mb (256K x 16) Static RAM

Features

•Very high speed: 55 ns and 70 ns

•Wide voltage range: 1.65V – 2.25V

•Pin-compatible with CY62147CV18

•Ultra-low active power

—Typical active current: 1 mA @ f = 1 MHz

—Typical active current: 6 mA @ f = fmax

•Ultra low standby power

•Easy memory expansion with CE, and OE features

•Automatic power-down when deselected

•CMOS for optimum speed/power

•Packages offered 48-ball BGA

Functional Description[1]

The CY62147DV18 is a high-performance CMOS static RAM organized as 256K words by 16 bits. This device features ad- vanced circuit design to provide ultra-low active current. This is ideal for providing More Battery Life™ (MoBL™) in portable applications such as cellular telephones. The device also has an automatic power-down feature that significantly reduces power consumption. The device can also be put into standby

mode reducing power consumption by more than 99% when deselected (CE HIGH or both BLE and BHE are HIGH). The input/output pins (I/O0 through I/O15) are placed in a high-im- pedance state when: deselected (CE HIGH), outputs are dis- abled (OE HIGH), both Byte High Enable and Byte Low Enable are disabled (BHE, BLE HIGH), or during a write operation (CE LOW and WE LOW).

Writing to the device is accomplished by asserting Chip En- able (CE) and Write Enable (WE) inputs LOW. If Byte Low Enable (BLE) is LOW, then data from I/O pins (I/O0 through I/O7), is written into the location specified on the address pins (A0 through A17). If Byte High Enable (BHE) is LOW, then data from I/O pins (I/O8 through I/O15) is written into the location specified on the address pins (A0 through A17).

Reading from the device is accomplished by asserting Chip Enable (CE) and Output Enable (OE) LOW while forcing the Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data from the memory location specified by the address pins will appear on I/O0 to I/O7. If Byte High Enable (BHE) is LOW, then data from memory will appear on I/O8 to I/O15. See the truth table for a complete description of read and write modes.

The CY62147DV18 is available in a 48-ball FBGA package.

Logic Block Diagram

A10

A9

DATA IN DRIVERS

A8	DECODER
A7
A4
A6
A5
A3	ROW
A2
A1
A0

256K x 16 RAM Array

SENSE AMPS

I/O0 – I/O7

I/O8 – I/O15

Power -Down Circuit

COLUMN DECODER
							BHE
11	12	13	14	15	16	17	WE
							CE
A	A	A	A A A			A	OE
							BLE

Note:

1.For best practice recommendations, please refer to the Cypress application note “System Design Guidelines” on http://www.cypress.com.

Cypress Semiconductor Corporation	•	3901 North First Street	•	San Jose, CA 95134	•	408-943-2600
Document #: 38-05343 Rev. *B				Revised February 26, 2004

[+] Feedback