Furuno ETR-30N manual Safety Instructions

Page 2

SAFETY INSTRUCTIONS

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment unless totally familiar with electrical circuits and service manual.

Only qualified personnel should work inside the equipment.

Turn off the power at the switchboard before beginning the installation.

Fire or electrical shock can result if the power is left on.

Do not install the equipment where it may get wet from rain or water splash.

Water in the equipment can result in fire, electrical shock or damage to the equipment.

Be sure no water leaks in at the trans- ducer mounting location.

Water leakage can sink the vessel. Also, confirm that the transducer will not loosen by ship's vibration. The installer of the equipment is solely responsible for the proper installation of the equipment. FURUNO will assume no responsibility for any damage associated with improper installation.

Be sure that the power supply is compatible with the voltage rating of the equipment.

Connection of an incorrect power supply can cause fire or damage the equipment.

Do not diassemble or modify the equipment.

Electrical shock, damage to the equipment or injury may result.

WARNING

Install the transducer tank according to the installation instructions.

Failure to install the tank correctly may result in water leakage and damage to the ship's hull.

i

Image 2
Contents Network Sounder Safety Instructions Be sure to enter transducer model correctly Table of Contents Single network sounder System ConfigurationSystem configuration, single network sounder Multiple network sounders System configuration, two ETR-30NSystem configuration, ETR-30N + ETR-6/10N Optional supply Equipment ListsStandard supply Name Type Code No Qty Remarks1kW transducer Available transducersVii Viii 1kW transducer con’t2kW transducer 3kW transducer 3kW transducer con’t Xii 1kW/2kW transducer1kW/3kW transducer Xiii1kW/2kW transducer con’t Xiv 1kW/3kW transducer con’t200B-12H 3 k 88/150 Steel 88B-8 Xvi 2kW/3kW transducerXvii 3kW/2kW transducer con’tMounting Mounting procedureMounting dimensions for the network sounder Network SounderTransducer Contents of piggyback mount kitHow to assemble the piggyback mount kit Stacking unitsStandard installation WIRING, SetupWiring Connection of network sounderGround How to attach connector to transducer cableTransducer Connection of multiple network sounders Network HUBNetwork sounder ETR-30N, top view, cover removed Settings for Single Network SounderInternal settings Sounder source setting FurunoSimulation mode window Network setup menuHost Name Transducer setupSounder setup Frequency options Frequency setup screenTransducer type setting method options Transducer type setting options Frequency input screenSettings for Two Network Sounders NET KP ETR-30N and ETR-6/10N Erasing Transducer Setting ETR-30N, cover removedNetwork sounder ETR-30N OPERATION, MaintenanceControls Choosing pulse repetition rate PRR Sounder system setup menuAdditions to NavNet Series Operator’s Manual Replacing Fuses Transducer frequencyAll Clear CPU BoardThis page is intentionally left blank Transducer, thru-hull pipe and tank list Appendix NEW BLT TransducersAP-1 Settings AP-2ETR-30N List Packing List Page Page Page Page 00080932900

ETR-30N specifications

The Furuno ETR-30N is a state-of-the-art marine radar system that is designed to be robust, reliable, and efficient for a wide range of maritime applications. This advanced radar solution is particularly favored by commercial vessels, fishing boats, and leisure crafts due to its high performance levels and user-friendly interface.

One of the primary features of the ETR-30N is its ability to provide high-resolution images of the surrounding environment. It utilizes an advanced pulse compression technology that enhances target detection capabilities, allowing for easier identification of other vessels, navigation aids, and potential obstacles in busy waterways. With its long-range capability, operators can monitor targets far in the distance and take strategic actions as necessary.

Another standout characteristic of the ETR-30N is its inclusion of a cutting-edge digital signal processing unit. This technology serves to eliminate clutter caused by waves, rain, and other interference, ensuring that the display remains clear and focused on relevant targets. The radar is also capable of automatic gain control, adjusting the signal strength based on environmental conditions and the distances of detected objects.

The ETR-30N features a user-friendly control interface, complete with intuitive menus and a touch screen option. This design allows for easy operation under a variety of conditions, ensuring that crew members can quickly learn the system without extensive training. The display can be customized to show different data, including navigation aids, target tracking information, and various radar modes.

In addition to its impressive radar capabilities, the ETR-30N is equipped with integrated AIS (Automatic Identification System) functionality, which provides real-time information about other vessels in the vicinity. This enhances situational awareness and significantly contributes to safety out on the water.

When it comes to installation and maintenance, the ETR-30N is designed with ease of use in mind. The compact design allows for flexibility in mounting, while the robust construction ensures longevity and reliability in harsh sea conditions. With its combination of high-tech features and practical design, the Furuno ETR-30N stands out as a leading choice for mariners seeking a dependable radar solution that meets both professional and recreational needs.