Furuno ETR-30N manual Net Kp

Page 31

Note: The same IP address cannot be used when installing two ETR-30N or ETR-6/10N. To change IP address and host name, set a different number (1-9) for each network sounder with the HOST NAME switch on the ETR-30N. Note however that the ETR-6/10N’s host name and IP address are “SOUNDER” and “172.31.92.1,” respectively, and they cannot be changed.

HOST NAME control setting and resulting host name and IP address

HOST NAME

Host Name

IP Address

Control Setting

 

 

 

 

 

0 (Default Setting)

SOUNDER

172.31.92.1

 

 

 

1

SOUNDER1

172.31.92.11

 

 

 

2

SOUNDER2

172.31.92.12

 

 

 

3

SOUNDER3

172.31.92.13

 

 

 

4

SOUNDER4

172.31.92.14

 

 

 

5

SOUNDER5

172.31.92.15

 

 

 

6

SOUNDER6

172.31.92.16

 

 

 

7

SOUNDER7

172.31.92.17

 

 

 

8

SOUNDER8

172.31.92.18

 

 

 

9

SOUNDER9

172.31.92.19

 

 

 

NET KP

If installing two ETR-30Ns, connect cable MJ-A7SPF0002-050 between NET KP OUT/IN ports to prevent interference. Maximum two ETR-30N units may be installed; however, there are two ports. One is for future use.

13

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Network Sounder Safety Instructions Be sure to enter transducer model correctly Table of Contents System configuration, single network sounder System ConfigurationSingle network sounder System configuration, ETR-30N + ETR-6/10N System configuration, two ETR-30NMultiple network sounders Name Type Code No Qty Remarks Equipment ListsStandard supply Optional supplyVii Available transducers1kW transducer 1kW transducer con’t Viii2kW transducer 3kW transducer 3kW transducer con’t 1kW/2kW transducer Xii1kW/2kW transducer con’t Xiii1kW/3kW transducer 1kW/3kW transducer con’t Xiv200B-12H 3 k 88/150 Steel 88B-8 2kW/3kW transducer Xvi3kW/2kW transducer con’t XviiNetwork Sounder Mounting procedureMounting dimensions for the network sounder MountingStacking units Contents of piggyback mount kitHow to assemble the piggyback mount kit TransducerConnection of network sounder WIRING, SetupWiring Standard installationTransducer How to attach connector to transducer cableGround Network HUB Connection of multiple network soundersInternal settings Settings for Single Network SounderNetwork sounder ETR-30N, top view, cover removed Furuno Sounder source settingNetwork setup menu Simulation mode windowSounder setup Transducer setupHost Name Transducer type setting method options Frequency setup screenFrequency options Frequency input screen Transducer type setting optionsSettings for Two Network Sounders NET KP ETR-30N and ETR-6/10N ETR-30N, cover removed Erasing Transducer SettingControls OPERATION, MaintenanceNetwork sounder ETR-30N Additions to NavNet Series Operator’s Manual Sounder system setup menuChoosing pulse repetition rate PRR Transducer frequency Replacing FusesCPU Board All ClearThis page is intentionally left blank AP-1 Appendix NEW BLT TransducersTransducer, thru-hull pipe and tank list AP-2 SettingsETR-30N Ｌｉｓｔ Ｐａｃｋｉｎｇ Ｌｉｓｔ Page Page Page Page 00080932900

ETR-30N specifications

The Furuno ETR-30N is a state-of-the-art marine radar system that is designed to be robust, reliable, and efficient for a wide range of maritime applications. This advanced radar solution is particularly favored by commercial vessels, fishing boats, and leisure crafts due to its high performance levels and user-friendly interface.

One of the primary features of the ETR-30N is its ability to provide high-resolution images of the surrounding environment. It utilizes an advanced pulse compression technology that enhances target detection capabilities, allowing for easier identification of other vessels, navigation aids, and potential obstacles in busy waterways. With its long-range capability, operators can monitor targets far in the distance and take strategic actions as necessary.

Another standout characteristic of the ETR-30N is its inclusion of a cutting-edge digital signal processing unit. This technology serves to eliminate clutter caused by waves, rain, and other interference, ensuring that the display remains clear and focused on relevant targets. The radar is also capable of automatic gain control, adjusting the signal strength based on environmental conditions and the distances of detected objects.

The ETR-30N features a user-friendly control interface, complete with intuitive menus and a touch screen option. This design allows for easy operation under a variety of conditions, ensuring that crew members can quickly learn the system without extensive training. The display can be customized to show different data, including navigation aids, target tracking information, and various radar modes.

In addition to its impressive radar capabilities, the ETR-30N is equipped with integrated AIS (Automatic Identification System) functionality, which provides real-time information about other vessels in the vicinity. This enhances situational awareness and significantly contributes to safety out on the water.

When it comes to installation and maintenance, the ETR-30N is designed with ease of use in mind. The compact design allows for flexibility in mounting, while the robust construction ensures longevity and reliability in harsh sea conditions. With its combination of high-tech features and practical design, the Furuno ETR-30N stands out as a leading choice for mariners seeking a dependable radar solution that meets both professional and recreational needs.
Top Page Image Contents