Furuno ETR-30N manual Replacing Fuses, Transducer frequency

Page 36

FREQ. ADJ

Adjusts transmitting frequency to suppress interference when it cannot be suppressed with the interference rejector alone.

TARGET ECHO

Sets fishing objective. Choose NORMAL for general fishing; SURFACE for detecting surface fish. Pulse repetition rate for “SURFACE” is higher than “NORMAL.”

Transducer frequency

The ETR-30N offers various transducer frequencies. Therefore, the descriptions “50 kHz” and “200 kHz” should read as “LF (Low Frequency)” and “HF (High Frequency),” respectively.

3.3 Replacing Fuses

The ETR-30N has two fuses to protect against overcurrent: a 5A fuse in the snap-in fuse holder in the power cable and a 7A fuse inside the network sounder. If a fuse blows, find the cause before replacing it. If it blows again after replacement, contact a FURUNO agent or dealer for advice. If the LED lamp is off and the fuse in the power cable is normal, the fuse inside the network sounder may have blown. If this occurs, contact a FURUNO agent or dealer.

NOTICE

Use the correct fuse.

Use of a wrong fuse can cause serious damage to the equipment.

18

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Network Sounder Safety Instructions Be sure to enter transducer model correctly Table of Contents System Configuration System configuration, single network sounderSingle network sounder System configuration, two ETR-30N System configuration, ETR-30N + ETR-6/10NMultiple network sounders Equipment Lists Standard supplyOptional supply Name Type Code No Qty RemarksAvailable transducers Vii1kW transducer Viii 1kW transducer con’t2kW transducer 3kW transducer 3kW transducer con’t Xii 1kW/2kW transducerXiii 1kW/2kW transducer con’t1kW/3kW transducer Xiv 1kW/3kW transducer con’t200B-12H 3 k 88/150 Steel 88B-8 Xvi 2kW/3kW transducerXvii 3kW/2kW transducer con’tMounting procedure Mounting dimensions for the network sounderMounting Network SounderContents of piggyback mount kit How to assemble the piggyback mount kitTransducer Stacking unitsWIRING, Setup WiringStandard installation Connection of network sounderHow to attach connector to transducer cable TransducerGround Connection of multiple network sounders Network HUBSettings for Single Network Sounder Internal settingsNetwork sounder ETR-30N, top view, cover removed Sounder source setting FurunoSimulation mode window Network setup menuTransducer setup Sounder setupHost Name Frequency setup screen Transducer type setting method optionsFrequency options Transducer type setting options Frequency input screenSettings for Two Network Sounders NET KP ETR-30N and ETR-6/10N Erasing Transducer Setting ETR-30N, cover removedOPERATION, Maintenance ControlsNetwork sounder ETR-30N Sounder system setup menu Additions to NavNet Series Operator’s ManualChoosing pulse repetition rate PRR Replacing Fuses Transducer frequencyAll Clear CPU BoardThis page is intentionally left blank Appendix NEW BLT Transducers AP-1Transducer, thru-hull pipe and tank list Settings AP-2ETR-30N Ｌｉｓｔ Ｐａｃｋｉｎｇ Ｌｉｓｔ Page Page Page Page 00080932900

ETR-30N specifications

The Furuno ETR-30N is a state-of-the-art marine radar system that is designed to be robust, reliable, and efficient for a wide range of maritime applications. This advanced radar solution is particularly favored by commercial vessels, fishing boats, and leisure crafts due to its high performance levels and user-friendly interface.

One of the primary features of the ETR-30N is its ability to provide high-resolution images of the surrounding environment. It utilizes an advanced pulse compression technology that enhances target detection capabilities, allowing for easier identification of other vessels, navigation aids, and potential obstacles in busy waterways. With its long-range capability, operators can monitor targets far in the distance and take strategic actions as necessary.

Another standout characteristic of the ETR-30N is its inclusion of a cutting-edge digital signal processing unit. This technology serves to eliminate clutter caused by waves, rain, and other interference, ensuring that the display remains clear and focused on relevant targets. The radar is also capable of automatic gain control, adjusting the signal strength based on environmental conditions and the distances of detected objects.

The ETR-30N features a user-friendly control interface, complete with intuitive menus and a touch screen option. This design allows for easy operation under a variety of conditions, ensuring that crew members can quickly learn the system without extensive training. The display can be customized to show different data, including navigation aids, target tracking information, and various radar modes.

In addition to its impressive radar capabilities, the ETR-30N is equipped with integrated AIS (Automatic Identification System) functionality, which provides real-time information about other vessels in the vicinity. This enhances situational awareness and significantly contributes to safety out on the water.

When it comes to installation and maintenance, the ETR-30N is designed with ease of use in mind. The compact design allows for flexibility in mounting, while the robust construction ensures longevity and reliability in harsh sea conditions. With its combination of high-tech features and practical design, the Furuno ETR-30N stands out as a leading choice for mariners seeking a dependable radar solution that meets both professional and recreational needs.
Top Page Image Contents