Furuno ETR-30N manual Transducer setup, Sounder setup, Host Name

Page 27

2.2.3 Transducer setup

CAUTION

Enter transducer setting correctly.

A wrong transducer setting can damage the transducer.

Transducer connected to the ETR-30N is programmed in the ETR-30N

1. At the installation menu, press the NETWORK SOUNDER SETUP soft key.

IP ADDRESS

172.031.092.001

HOST NAME

SOUNDER____

Note: Do not change IP address or host name from this display.

SNDR

SETUP

EDIT

FREQ

SETUP

RETURN

Sounder setup

2.Press the FREQ SETUP soft key. (If the FREQ SETUP soft key is not shown, check that the ETR-30N is powered.) Confirm that sounder source (shown on the network setup menu, see page 8) and the HOST NAME control setting are the same.

HOST NAME

Host Name

Control Setting

 

0 (Default Setting)

SOUNDER

1

SOUNDER1

2

SOUNDER2

3

SOUNDER3

4

SOUNDER4

5

SOUNDER5

6

SOUNDER6

7

SOUNDER7

8

SOUNDER8

9

SOUNDER9

9

Image 27
Contents Network Sounder Safety Instructions Be sure to enter transducer model correctly Table of Contents System Configuration System configuration, single network sounderSingle network sounder System configuration, two ETR-30N System configuration, ETR-30N + ETR-6/10NMultiple network sounders Name Type Code No Qty Remarks Equipment ListsStandard supply Optional supplyAvailable transducers Vii1kW transducer 1kW transducer con’t Viii2kW transducer 3kW transducer 3kW transducer con’t 1kW/2kW transducer XiiXiii 1kW/2kW transducer con’t1kW/3kW transducer 1kW/3kW transducer con’t Xiv200B-12H 3 k 88/150 Steel 88B-8 2kW/3kW transducer Xvi3kW/2kW transducer con’t XviiNetwork Sounder Mounting procedureMounting dimensions for the network sounder MountingStacking units Contents of piggyback mount kitHow to assemble the piggyback mount kit TransducerConnection of network sounder WIRING, SetupWiring Standard installationHow to attach connector to transducer cable TransducerGround Network HUB Connection of multiple network soundersSettings for Single Network Sounder Internal settingsNetwork sounder ETR-30N, top view, cover removed Furuno Sounder source settingNetwork setup menu Simulation mode windowTransducer setup Sounder setupHost Name Frequency setup screen Transducer type setting method optionsFrequency options Frequency input screen Transducer type setting optionsSettings for Two Network Sounders NET KP ETR-30N and ETR-6/10N ETR-30N, cover removed Erasing Transducer SettingOPERATION, Maintenance ControlsNetwork sounder ETR-30N Sounder system setup menu Additions to NavNet Series Operator’s ManualChoosing pulse repetition rate PRR Transducer frequency Replacing FusesCPU Board All ClearThis page is intentionally left blank Appendix NEW BLT Transducers AP-1Transducer, thru-hull pipe and tank list AP-2 SettingsETR-30N List Packing List Page Page Page Page 00080932900

ETR-30N specifications

The Furuno ETR-30N is a state-of-the-art marine radar system that is designed to be robust, reliable, and efficient for a wide range of maritime applications. This advanced radar solution is particularly favored by commercial vessels, fishing boats, and leisure crafts due to its high performance levels and user-friendly interface.

One of the primary features of the ETR-30N is its ability to provide high-resolution images of the surrounding environment. It utilizes an advanced pulse compression technology that enhances target detection capabilities, allowing for easier identification of other vessels, navigation aids, and potential obstacles in busy waterways. With its long-range capability, operators can monitor targets far in the distance and take strategic actions as necessary.

Another standout characteristic of the ETR-30N is its inclusion of a cutting-edge digital signal processing unit. This technology serves to eliminate clutter caused by waves, rain, and other interference, ensuring that the display remains clear and focused on relevant targets. The radar is also capable of automatic gain control, adjusting the signal strength based on environmental conditions and the distances of detected objects.

The ETR-30N features a user-friendly control interface, complete with intuitive menus and a touch screen option. This design allows for easy operation under a variety of conditions, ensuring that crew members can quickly learn the system without extensive training. The display can be customized to show different data, including navigation aids, target tracking information, and various radar modes.

In addition to its impressive radar capabilities, the ETR-30N is equipped with integrated AIS (Automatic Identification System) functionality, which provides real-time information about other vessels in the vicinity. This enhances situational awareness and significantly contributes to safety out on the water.

When it comes to installation and maintenance, the ETR-30N is designed with ease of use in mind. The compact design allows for flexibility in mounting, while the robust construction ensures longevity and reliability in harsh sea conditions. With its combination of high-tech features and practical design, the Furuno ETR-30N stands out as a leading choice for mariners seeking a dependable radar solution that meets both professional and recreational needs.