Furuno ETR-30N Frequency setup screen, Transducer type setting method options, Frequency options

Page 28

TRANSDUCER SETUP

MANUAL

HIGH FREQUENCY

--kHz

 

(0kW TAP:-)

LOW FREQUENCY

--kHz

 

(0kW TAP:-)

TAP SETTINGS MUST BE MADE ON ETR UNIT.

AFTER SETUP, DISPLAY MUST BE TURNED OFF & ON TO ALLOW NEW SETTINGS TO TAKE EFFECT.

SNDR

SETUP

EDIT

RETURN

Frequency setup screen

3. TRANSDUCER SETUP is selected; press the EDIT soft key.

TRANSDUCER SETUP

MODEL NUMBER

MANUAL

Transducer type setting method options

4.Use the [ENTER] knob to choose MODEL NUMBER and then push the [ENTER] knob.

5.Use the [ENTER] knob to choose HIGH FREQUENCY and then push the [ENTER] knob.

HIGH FREQUENCY

28kHz 28F-8 28kHz 28F-18 28kHz 28F-24H 38kHz 38E-9-18S1 45kHz 45F-12H 50kHz 50B-6/6B 50kHz 50B-9/9B 50kHz 50F-8G 50kHz 50/200-1ST 50kHz 50/200-1T

Frequency options

6.Rotate the [ENTER] knob to choose transducer and then push the [ENTER] knob.

7.Confirm tap position at the SNDR SETUP screen.

8.If a low-frequency transducer is installed, set it following this procedure.

9.Turn off the NavNet display unit.

10.Turn on the NavNet display unit. Confirm that the echo sounder picture advances.

10

Image 28
Contents Network Sounder Safety Instructions Be sure to enter transducer model correctly Table of Contents System configuration, single network sounder System ConfigurationSingle network sounder System configuration, ETR-30N + ETR-6/10N System configuration, two ETR-30NMultiple network sounders Equipment Lists Standard supplyOptional supply Name Type Code No Qty RemarksVii Available transducers1kW transducer Viii 1kW transducer con’t2kW transducer 3kW transducer 3kW transducer con’t Xii 1kW/2kW transducer1kW/2kW transducer con’t Xiii1kW/3kW transducer Xiv 1kW/3kW transducer con’t200B-12H 3 k 88/150 Steel 88B-8 Xvi 2kW/3kW transducerXvii 3kW/2kW transducer con’tMounting procedure Mounting dimensions for the network sounderMounting Network SounderContents of piggyback mount kit How to assemble the piggyback mount kitTransducer Stacking unitsWIRING, Setup WiringStandard installation Connection of network sounderTransducer How to attach connector to transducer cableGround Connection of multiple network sounders Network HUBInternal settings Settings for Single Network SounderNetwork sounder ETR-30N, top view, cover removed Sounder source setting FurunoSimulation mode window Network setup menuSounder setup Transducer setupHost Name Transducer type setting method options Frequency setup screenFrequency options Transducer type setting options Frequency input screenSettings for Two Network Sounders NET KP ETR-30N and ETR-6/10N Erasing Transducer Setting ETR-30N, cover removedControls OPERATION, MaintenanceNetwork sounder ETR-30N Additions to NavNet Series Operator’s Manual Sounder system setup menuChoosing pulse repetition rate PRR Replacing Fuses Transducer frequencyAll Clear CPU BoardThis page is intentionally left blank AP-1 Appendix NEW BLT TransducersTransducer, thru-hull pipe and tank list Settings AP-2ETR-30N List Packing List Page Page Page Page 00080932900

ETR-30N specifications

The Furuno ETR-30N is a state-of-the-art marine radar system that is designed to be robust, reliable, and efficient for a wide range of maritime applications. This advanced radar solution is particularly favored by commercial vessels, fishing boats, and leisure crafts due to its high performance levels and user-friendly interface.

One of the primary features of the ETR-30N is its ability to provide high-resolution images of the surrounding environment. It utilizes an advanced pulse compression technology that enhances target detection capabilities, allowing for easier identification of other vessels, navigation aids, and potential obstacles in busy waterways. With its long-range capability, operators can monitor targets far in the distance and take strategic actions as necessary.

Another standout characteristic of the ETR-30N is its inclusion of a cutting-edge digital signal processing unit. This technology serves to eliminate clutter caused by waves, rain, and other interference, ensuring that the display remains clear and focused on relevant targets. The radar is also capable of automatic gain control, adjusting the signal strength based on environmental conditions and the distances of detected objects.

The ETR-30N features a user-friendly control interface, complete with intuitive menus and a touch screen option. This design allows for easy operation under a variety of conditions, ensuring that crew members can quickly learn the system without extensive training. The display can be customized to show different data, including navigation aids, target tracking information, and various radar modes.

In addition to its impressive radar capabilities, the ETR-30N is equipped with integrated AIS (Automatic Identification System) functionality, which provides real-time information about other vessels in the vicinity. This enhances situational awareness and significantly contributes to safety out on the water.

When it comes to installation and maintenance, the ETR-30N is designed with ease of use in mind. The compact design allows for flexibility in mounting, while the robust construction ensures longevity and reliability in harsh sea conditions. With its combination of high-tech features and practical design, the Furuno ETR-30N stands out as a leading choice for mariners seeking a dependable radar solution that meets both professional and recreational needs.